› Effect of temperature on chemical activity of nascent steel surface - Mori Shigeyuki(1), Konno Tadaaki(1), Shimotomai Naoshi(2), Nanao Hidetaka(1), Takiwatari Koji(3), Hoshi Yasushi(1) 1 - Department of Chemistry and Bioengineering, Faculty of Engineering, Iwate University (Japan), 2 - Kyodoyushi Co. Ltd (Japan), 3 - Ichinoseki National College of Technology (Japan)
16:25-16:45 (20min)
› Model order reduction on stationary and dynamical isothermal Newtonian EHD contacts - Maier Daniel(1), Hager Corinna(1), Hetzler Hartmut(2), Fillot Nicolas(3), Vergne Philippe(3), Dureisseix David(3), Seemann Wolfgang(2) 1 - Robert Bosch GmbH (Germany), 2 - Karlsruhe Institute of Technology (Germany), 3 - Laboratoire de Mécanique des Contacts et des Structures (France)
16:45-17:05 (20min)
› Effect of mental sweating on fingertip friction - Mizuhara Kazuyuki(1), Washio Toshikatsu(2), Hatano Hiroyuki(3), Ozaki Shiyo(1) 1 - Tokyo Denki University (Japan), 2 - The National Institute of Advanced Industrial Science and Technology (Japan), 3 - Kits Corporation (Japan)
16:25-16:45 (20min)
› Nanofriction properties of graphite tribofilms: influence of the tip/sample interface - Minatchy Georges(1), Romana Laurence(1), Bilas Philippe(1), Nomede Nadiege Martyr(2), Thomas Philippe(1), Mansot Jean-Louis(3)(1) 1 - Groupe de Technologie des surfaces et Interfaces (Guadeloupe), 2 - Laboratoire d'analyse par réactions nucléaires (Belgium), 3 - Centre commun de caratérisation des matériaux des Antilles et de la Guyane (Guadeloupe)
17:20-17:40 (20min)
› Experimental and theoretical investigations of friction properties of graphite intercalated compounds. - Mansot Jean-Louis(1)(2), Delbé K.(3), Baranek P.(4), Thomas P.(2), Boucher F.(5), Vangelisti F.(6), Billaud D.(6) 1 - Centre commun de caractérisation des matériaux des Antilles et de la Guyane (Guadeloupe), 2 - Groupe de Technologie des surfaces et Interfaces (Guadeloupe), 3 - Laboratoire Génie de Production (France), 4 - EDF - R&D, Department MMC and MAI (France), 5 - Institut des matériaux Jean Rouxel (France), 6 - Institut Jean Lamour (France)
17:40-18:00 (20min)
› Exfoliation of Graphene from C60 monolayer - Miura Kouji(1), Ishikawa M.(1), Ichikawa M.(1), Sasaki N.(2) 1 - Aichi University of Education (Japan), 2 - Department of Materials and Life Science, Faculty of Science and Technology, Seikei University (Japan)
18:00-18:20 (20min)
› Effects of Doping Elements on the Tribological Properties of DLC films - Fukuda Hirochika(1), Tsuboi Ryo(1), Sasaki Shinya(2)(1), Tamura Tetsuya(3), Katou Shinji(3) 1 - Department of Mechanical Engineering, Graduate School of Tokyo University of Science (Japan), 2 - Tokyo University of Science (Japan), 3 - KYB Corporation (Japan)
18:30-20:00 (1h30)
› Mechanical Response of Coated Surfaces under Severe Contact Loading - Elwafi Ali(1), Al-Sadi Bader(1), Al-Rushdi Azan(1), Barton David C.(2) 1 - Faculty of engineering (Oman), 2 - School of Mechanical Engineering, University of Leeds (United Kingdom)
18:30-20:00 (1h30)
› Neutron reflectometry of adsorbed additive layers on (a-C) DLC - Simic Rok(1), Kalin Mitjan(1), Hirayama Tomoko(2) 1 - Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana (Slovenia), 2 - Department of Mechanical Engineering, Doshisha University (Japan)
18:30-20:00 (1h30)
› Tribological and Electrical Contact Behavior of Metal/DLC Nanocomposite Coating on Brass Substrate - Hombo Ryoichi(1), Takeno Takanori(2), Fontaine Julien(3), Miki Hiroyuki(4), Kato Naoki(1), Nozu Takahiro(1), Inayoshi Naruhiko(1), Belin Michel(3), Takagi Toshiyuki(5) 1 - DENSO CORPORATION (Japan), 2 - Graduate School of Engineering, Tohoku University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 4 - Frontier research Institute for Interdisciplinary Science, Tohoku University (Japan), 5 - Institute of Fluid Science, Tohoku University (Japan)
18:30-20:00 (1h30)
› Tribological behaviour of ZrCN PVD and other DLC coatings for engine components - Igartua Amaya(1), Fernandez X.(1), Zabala Borja(1), Ruiz De Gopegui U.(1), Tribotte P.(2), Abramczuk M.(2), Malhaire J.-M.(2) 1 - IK4-Tekniker (Spain), 2 - Renault - Direction de la Recherche, des Etudes Avancées et des Matériaux (France)
18:30-20:00 (1h30)
› High-tech anti-wear lubricant based on carbon nanotube/ionic liquid combination - Taaber Triinu(1)(2), Põhako-Esko Kaija(1)(2), Plaado Margo(1), Saal Kristjan(1), Lõhmus Rünno(1), Mäeorg Uno(2) 1 - University of Tartu, Institute of Physics and Estonian Nanotechnology Competence Center (Estonia), 2 - University of Tartu - Institute of Chemistry (Estonia)
18:30-20:00 (1h30)
› 1,3-Diketone Fluids and their Complexes with Iron - Walter Michael(1)(2), Amann Tobias(2), Li Ke(3), Kailer Andreas(2), Rühe Jürgen(3), Moseler Michael(2) 1 - Freiburg Materials Research Center (Germany), 2 - IWM - Fraunhofer Institute for Mechanics of Materials (Germany), 3 - Department of Microsystems Engineering (Germany)
18:30-20:00 (1h30)
› Adsorption of fatty acids on steel and gold surfaces: An in-situ XPS study - Matta Christine(1), Loehlé Sophie(1), Minfray Clotilde(1), Le Mogne Thierry(1), Martin Jean-Michel(1), Iovine Raphaele(2), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - Tohoku University (Japan)
18:30-20:00 (1h30)
› Effect of Lubricant Chemistry on the Camshaft Friction and Follower Rotation - Mufti Riaz(1), Khurram Muhammad(1), Qureshi Farrukh(2), Zahid Rehan(1), Aslam Jawad(1) 1 - National University of Sciences and Technology, School of Mechanical and Manufacturing Engineering (Pakistan), 2 - The Lubrizol Corporation (United States)
18:30-20:00 (1h30)
› Effects of iron oxide layers on adsorption mechanism of C18 fatty acid: A computational study - Loehlé Sophie(1), Minfray Clotilde(1), Christine Matta(1), Le Mogne Thierry(1), Martin Jean Michel(1), Iovine Raphaele(2), Obara Yukiko(3), Miura Ryuji(3), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - NICHe (Japan)
18:30-20:00 (1h30)
› Impact Study of Fuel Additives in Piston Ring Cylinder Liner Contact - Forest Cyrielle(1), Matta Christine(1), De Barros Bouchet Maria-Isabel(1), Mazarin Michael(2), Le Mogne Thierry(1), Martin Jean Michel(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL Raffinage Marketing (France)
18:30-20:00 (1h30)
› Microencapsulation for Next Generation Lubrication - Mitchell Karen(1), Neville Anne(2), Morina Ardian(1), Cayre Olivier(1), Sutton Mike(3), Walker Gary(3) 1 - University of Leeds (United Kingdom), 2 - Institue of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds (United Kingdom), 3 - Lubrizol Limited (United Kingdom)
18:30-20:00 (1h30)
› Optimized Nanolubricant for Friction Reduction - Abdullah Muhammad Ilman Hakimi Chua(1), Abdollah Mohd Fadzli Bin(1), Amiruddin Hilmi(1), Mat Nuri Nur Rashid(1) 1 - Center of Advanced Research on Energy, Universiti Teknikal Malaysia Melaka (Malaysia)
18:30-20:00 (1h30)
› Study of GMO concentration on the boundary lubricated W-doped DLC coatings - Yang Liuquan(1), Neville Anne(1), Brown Alisdair(2), Ransom Paul(2), Morina Ardian(1) 1 - Institute of Engineering Thermofluids, Surfaces and Interfaces (iETSI) (United Kingdom), 2 - Afton Chemical Limited (United Kingdom)
18:30-20:00 (1h30)
› A micromechanical approach for the wear prediction of fiber-reinforced composites - Yang Dan(1), Gu Shui-Tao(1), He Qi-Chang(2) 1 - School of Mechanical Engineering, Tribology Research Institute, Southwest Jiaotong University (China), 2 - Université Paris-Est, Laboratoire Modélisation et Simulation Multi Echelle (France)
18:30-20:00 (1h30)
› Alloying process for Cu-Zn mixed powder using the tribo-mechanical approach - Miki Hiroyuki(1), Sakuma Tomoya(2), Nakayama Noboru(3), Miyazaki Takamichi(4), Takeishi Hiroyuku(2) 1 - Frontier research Institute for Interdisciplinary Science, Tohoku University (Japan), 2 - Science and Mechanical Department, Chiba Institute of Technology (Japan), 3 - Mechanical Systems Engineering Department, Shinshu University (Japan), 4 - Technical Division, School of Engineering, Tohoku University (Japan)
18:30-20:00 (1h30)
› Biomimetic Sealing System for Power Generation from Natural Energy - Nakanishi Yoshitaka(1), Shimazu Kenryo(1), Mine Syouji(1), Oka Yuichi(1), Matsumoto Yasuaki(1), Higaki Hidehiko(2) 1 - Kumamoto University (Japan), 2 - Kyushu Sangyo University (Japan)
18:30-20:00 (1h30)
› Comparative Tribological study of biomaterials AISI 316L and Ti6Al7Nb - Fellah Mamoun(1), Labaïz Mohamed(1), Assala Omar(1), Iost Alain(2) 1 - Surface Engineering and Tribology Team, Laboratory of Metallurgy and Engineering Materials (Algeria), 2 - Laboratoire de Mécanique de Lille (France)
18:30-20:00 (1h30)
› Modeling of the abrasive tool wear in metal cutting: Influence of the sliding-sticking contact zones - Halila Faycel(1)(2), Nouari Mohammed(1)(2), Czarnota Christophe(3) 1 - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée (France), 2 - École Nationale Supérieure des Mines d'Albi-Carmaux (France), 3 - Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (France)
18:30-20:00 (1h30)
› Prevent/Limit Edge Loading in Total hip Replacement - Torabi Kachousangi Ehsanollah(1), Asadirad Reyhaneh(1), Mao Ken(1) 1 - The University of Warwick - School of Engineering (United Kingdom)
18:30-20:00 (1h30)
› Study of nitrided steel R6M5 abrasive wear-resistance - Rakhadilov Bauyrzhan(1), Skakov Mazhyn(1), Shceffler Michael(2) 1 - D. Serikbayev East Kazakhstan state technical university (Kazakhstan), 2 - Otto-von-Guericke University Magdeburg (Germany)
18:30-20:00 (1h30)
› A benchmark of filtering methods for tribological surfaces - Le Goic Gaetan(1), Bigerelle Maxence(2), Favrelière Hugues(1), Samper Serge(1) 1 - Laboratoire SYstèmes et Matériaux pour la MEcatronique (France), 2 - Thermique, Ecoulement mécanique, Matériaux, Mise en forme, PrOduction (France)
18:30-20:00 (1h30)
› Application of Surface Modification for Airplanes Winglets - Ibrahim Zaharah(1), Osman M.shahril(1), Khan Amir Azam(1), Ibrahim M. Danial(1), Miyanaga Norifumi(2) 1 - Universiti Malaysia Sarawak (Malaysia), 2 - Waseda University (Japan)
18:30-20:00 (1h30)
› Decomposition of a tribological system by chaos theory - Bigerelle Maxence(1), Nianga Jean Marie(2), Iost Alain(2) 1 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France), 2 - Laboratoire de Mécanique de Lille (France)
18:30-20:00 (1h30)
› Friction and material transfer of a textured wafer surface during sliding - Xiao H.(1), Wang K.(2), Belin Michel(3), Fontaine Julien(3), Liang Hong(1) 1 - Mechanical Engineering (United States), 2 - Materials Science and Engineering, Texas A&M University (United States), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France)
18:30-20:00 (1h30)
› In-situ observation of the friction/water depth relationship - Cerezo Veronique(1), Bouteldja Mohamed(2), Prevost Delphine(3), Do Minh-Tan(1) 1 - IFSTTAR (France), 2 - Département Laboratoire de Lyon (France), 3 - RENAULT (France)
18:30-20:00 (1h30)
› Numerical Modeling for Cold Sprayed Particle Deposition - Xie Jing(1), Nelias Daniel(1), Walter-Le Berre Hélène(1), Ito Kiyohiro(2), Ichikawa Yuji(2), Ogawa Kazuhiro(2) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Tohoku University (Japan)
18:30-20:00 (1h30)
› Relationship between brightness and roughness of polypropylene abraded surfaces - Najjar Denis(1), Van Gorp Adrien(2), Bigerelle Maxence(3) 1 - Ecole Centrale de Lille (France), 2 - Centre Arts et Métiers ParisTech de Lille (France), 3 - Université de Valenciennes et du Hainaut Cambrésis (France)
18:30-20:00 (1h30)
› Roughness and Wetting, a Multiscale Approach - Belaud Vanessa(1), Bigerelle Maxence(2)(3), Valette Stephane(1), Stremsdoerfer Guy(1), Benayoun Stephane(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - Laboratoire de Thermique, des Ecoulements, de Mécanique et Matériaux en Mise en Forme et Production (France), 3 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France)
18:30-20:00 (1h30)
› Running-in process of Si-SiOx/SiO2 pair at nanoscale - Qian Linmao(1), Chen Lei(1), Kim Seong H.(2), Wang Xiaodong(1) 1 - Tribology Research Institute, National Traction Power Laboratory, Southwest Jiaotong University (China), 2 - Department of Chemical Engineering, The Pennsylvania State University (United States)
18:30-20:00 (1h30)
› The Representative Topography of Worn Hot Rolling Mill Cylinders - Luc Emilie(1), Bigerelle Maxence(2), Deltombe Raphaël(2) 1 - APERAM Stainless Services and Solutions (France), 2 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France)
18:30-20:00 (1h30)
› Topographical Model Selection in Tribology - Tchoundjeu Stéphane(1)(2), Bigerelle Maxence(3), Robbe-Valloire François(2), Da Silva T.(2), Jarnias Frédéric(1) 1 - Total Supply Marketing (France), 2 - Laboratoire d'Ingénierie des Systèmes Mécaniques et des MAtériaux (France), 3 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France)
18:30-20:00 (1h30)
› Tribological Performance of PTFE + Taillings of Scheelite Composites - Juliana Souza Juliana(1), De Sá Leitão N. C. M. C.(1), De Azevedo M. S. P.(1), De Azevedo L. S. P.(1), Oliveira P. M.(1), De Medeiros J. T. N.(1), Matamoros E. P.(1) 1 - Federal University of Rio Grande do Norte (Brazil), Federal University of Rio Grande do Norte
18:30-20:00 (1h30)
CARACAS - BRASILIA
