Final program

Week Wed. 04 Thu. 05 Fri. 06 List

	Wed. 04	Thu. 05	Fri. 06
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00	Registration + Lunch (11:30-13:30) 10:00 - 14:00 (4h) Registration + Lunch (11:30-13:30) Opening 14:00 - 14:40 (40min) Opening CARACAS - BRASILIA Plenary conference 14:40 - 15:25 (45min) Plenary conference CARACAS - BRASILIA Chairman: J.-M. Martin › Tribochemistry and tribocorrosion; understanding the interface to design better engineering systems - Anne Neville, University of Leeds 14:40-15:25 (45min) Refreshment 15:25 - 15:45 (20min) Refreshment T5/6 - Chemical and structural activation in tribology I T1 - Elastohydrodynamic lubrication T2 - Biotribology I 15:45 - 17:05 (1h20) T5/6 - Chemical and structural activation in tribology I CARACAS - BRASILIA Chairmen: J.-M. Martin and A. Miyamoto › Position-Shift of Triboplasma Generation Observed by Temperature Measurement as the Origin of Tribochemical Reactions - Nakayama Keiji(1) 1 - Chiba Institute of Technology (Japan) 15:45-16:05 (20min) › Atomistic simulation on the sliding of a rigid indenter over aluminum with crystalline defects - Bortoleto Eleir(1), Souza Roberto(1), Cuppari Marcio(2) 1 - Surface Phenomena Laboratory of Polytechnic School of the University of São Paulo (Brazil), 2 - Federal University of ABC (Brazil) 16:05-16:25 (20min) › Effect of temperature on chemical activity of nascent steel surface - Mori Shigeyuki(1), Konno Tadaaki(1), Shimotomai Naoshi(2), Nanao Hidetaka(1), Takiwatari Koji(3), Hoshi Yasushi(1) 1 - Department of Chemistry and Bioengineering, Faculty of Engineering, Iwate University (Japan), 2 - Kyodoyushi Co. Ltd (Japan), 3 - Ichinoseki National College of Technology (Japan) 16:25-16:45 (20min) › Tribochemical effects during running-in of metals and alloys - Dienwiebel Martin(1), Feser Tim(1), Stoyanov Pantcho(1) 1 - FhG-KIT Mikrotribologie Centrum (Germany) 16:45-17:05 (20min) 15:45 - 17:05 (1h20) T1 - Elastohydrodynamic lubrication LIMA Chairman: A. Almqvist › Effect of Hertzian Contact Pressure on Shear Stress Distribution of EHL Oil Films - Mawatari Toshifumi(1), Nakajima Akira(1), Zhang Bo(1), Ohno Nobuyoshi(1), Kaneta Motohiro(2) 1 - Saga university (Japan), 2 - Brno University of Technology (Czech Republic) 15:45-16:05 (20min) › Transient effects and associated time scales in thermal elasto-hydrodynamic line contacts - Raisin Jonathan(1), Fillot Nicolas(1), Dureisseix David(1), Vergne Philippe(1), Lacour Vincent(2) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Total Supply Marketing, Centre de Recherche de Solaize (France) 16:05-16:25 (20min) › Reduced Finite Element Elastohydrodynamic Lubrication Model: Circular Contacts - Habchi Wassim(1) 1 - Lebanese American University, Department of Industrial and Mechanical Engineering (Lebanon) 16:25-16:45 (20min) › Model order reduction on stationary and dynamical isothermal Newtonian EHD contacts - Maier Daniel(1), Hager Corinna(1), Hetzler Hartmut(2), Fillot Nicolas(3), Vergne Philippe(3), Dureisseix David(3), Seemann Wolfgang(2) 1 - Robert Bosch GmbH (Germany), 2 - Karlsruhe Institute of Technology (Germany), 3 - Laboratoire de Mécanique des Contacts et des Structures (France) 16:45-17:05 (20min) 15:45 - 17:05 (1h20) T2 - Biotribology I MEXICO Chairman: N. Spencer › Influence of Surface Roughness on the Fretting-Corrosion Regimes and Characteristics of Cemented Femoral Stems - Michael Bryant(1), Farrar Richard(2), Freeman Robert(2), Brumitt Ken(2), Neville Anne(1) 1 - Institute of Engineering Thermofluids, Surfaces and Interfaces (United Kingdom), 2 - DePuy International (United Kingdom) 15:45-16:05 (20min) › Influence of surface morphology on mechanical properties of polyethylene. Tribological consequences in a biomimetic environment - Popa Mihaela(1), Wang Na(1), Portinha Daniel(2), Rieu Jean-Paul(3), Sfarghiu Ana-Maria(1), Berthier Yves(1) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Ingénierie des Matériaux Polymères (France), 3 - Institut Lumière Matière (France) 16:05-16:25 (20min) › Effect of mental sweating on fingertip friction - Mizuhara Kazuyuki(1), Washio Toshikatsu(2), Hatano Hiroyuki(3), Ozaki Shiyo(1) 1 - Tokyo Denki University (Japan), 2 - The National Institute of Advanced Industrial Science and Technology (Japan), 3 - Kits Corporation (Japan) 16:25-16:45 (20min) › An Evaluation of the Needed Dimples Spacing and Roughness of Hip Joint Prosthesis Articulating Surfaces at Partially Regular Surface Texture - Pakhaliuk Volodymyr(1), Kalinin Mikhaylo(1), Poliakov Oleksandr(1), Pashkov Yevgen(1), Ivanov Yevgen(1) 1 - Sevastopol National Technical University (Ukraine) 16:45-17:05 (20min) Refreshment 17:05 - 17:20 (15min) Refreshment T5/6 - Graphitic materials in tribology T2 - Contact mechanics T2 - Friction and wear I 17:20 - 18:20 (1h) T5/6 - Graphitic materials in tribology CARACAS - BRASILIA Chairmen: F. Dassenoy and M. Dienwiebel › Nanofriction properties of graphite tribofilms: influence of the tip/sample interface - Minatchy Georges(1), Romana Laurence(1), Bilas Philippe(1), Nomede Nadiege Martyr(2), Thomas Philippe(1), Mansot Jean-Louis(3)(1) 1 - Groupe de Technologie des surfaces et Interfaces (Guadeloupe), 2 - Laboratoire d'analyse par réactions nucléaires (Belgium), 3 - Centre commun de caratérisation des matériaux des Antilles et de la Guyane (Guadeloupe) 17:20-17:40 (20min) › Experimental and theoretical investigations of friction properties of graphite intercalated compounds. - Mansot Jean-Louis(1)(2), Delbé K.(3), Baranek P.(4), Thomas P.(2), Boucher F.(5), Vangelisti F.(6), Billaud D.(6) 1 - Centre commun de caractérisation des matériaux des Antilles et de la Guyane (Guadeloupe), 2 - Groupe de Technologie des surfaces et Interfaces (Guadeloupe), 3 - Laboratoire Génie de Production (France), 4 - EDF - R&D, Department MMC and MAI (France), 5 - Institut des matériaux Jean Rouxel (France), 6 - Institut Jean Lamour (France) 17:40-18:00 (20min) › Exfoliation of Graphene from C60 monolayer - Miura Kouji(1), Ishikawa M.(1), Ichikawa M.(1), Sasaki N.(2) 1 - Aichi University of Education (Japan), 2 - Department of Materials and Life Science, Faculty of Science and Technology, Seikei University (Japan) 18:00-18:20 (20min) 17:20 - 18:20 (1h) T2 - Contact mechanics LIMA Chairwoman: A. Fabre › Influence of a single asperity on stresses during lubricated sliding contact on DLC-coated system - Pagnoux Geoffrey(1)(2)(3), Fouvry Siegfried(3), Peigney Michael(2), Delattre Benoit(1), Mermaz-Rollet Guillaume(1) 1 - PSA Peugeot-Citroen (France), 2 - Laboratoire Navier (France), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 17:20-17:40 (20min) › Surface Star Defect Tolerance Assessment on finished Silicon Nitride balls in Rolling Contact - Awan Abdul Waheed(1), Hadfield Mark(1), Thomas Ben(1), Vieillard Charlotte(2), Cundill Robin 1 - Bournemouth University (United Kingdom), 2 - SKF (Netherlands) 17:40-18:00 (20min) › Elastic contact between representative rough surfaces - Yastrebov Vladislav(1), Anciaux Guillaume(2), Cailletaud Georges(1), Molinari Jean-François(2) 1 - Centre des Matériaux, MINES ParisTech (France), 2 - Laboratoire de Simulation en Mécanique des Solides, EPFL (Switzerland) 18:00-18:20 (20min) 17:20 - 18:20 (1h) T2 - Friction and wear I MEXICO Chairman: M. Kaneta › Probing the micromechanics of a multi-contact interface at the onset of frictional sliding - Prevost Alexis(1), Scheibert Julien(2), Debrégeas Georges(1) 1 - Laboratoire Jean PERRIN (France), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 17:20-17:40 (20min) › Wear Depth Evaluation During Erosion of X65 Carbon Steel Using RMS Values of Measured Acoustic Emission Signals - Ukpai Jonathan(1), Barker Richard(1), Neville Anne(1) 1 - Institue of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds (United Kingdom) 17:40-18:00 (20min) › Sliding Friction by a Liquid Meniscus Bridge between Parallel Plates - Kentaro Tanaka(1), Iwamoto Katsumi(1) 1 - Tokyo University of Marine Science and Technology (Japan) 18:00-18:20 (20min) Poster party Posters - Coatings & Surfaces Posters - Fluid Lubrication Posters - Lubricant Additives Posters - Materials for Tribology Posters - Surface Engineering 18:30 - 20:00 (1h30) Poster party 18:30 - 20:00 (1h30) Posters - Coatings & Surfaces › Analysis by Scratch Method of Coatings of AISI5115 and M31 Steels Coated with AlTiN and CrN Using PVD Method - Aytaç Ayhan(1), Malayoglu Ugur(2), Sert Hasan(3) 1 - Turkish Military Academy (Turkey), 2 - Dokuz Eylül University (Turkey), 3 - University of Turkish Aeronautical Association (Turkey) 18:30-20:00 (1h30) › Development of a combined optical lever atomic force microscope with a quartz crystal microbalance - Inoue Daisuke(1), Machida Shingo(1), Ikada Yuka(1), Taniguchi Junko(1), Suzuki Masaru(1), Ishikawa Makoto(2), Miura Kouji(2) 1 - University of Electro-Communications (Japan), 2 - Aichi University of Education (Japan) 18:30-20:00 (1h30) › Effects of Doping Elements on the Tribological Properties of DLC films - Fukuda Hirochika(1), Tsuboi Ryo(1), Sasaki Shinya(2)(1), Tamura Tetsuya(3), Katou Shinji(3) 1 - Department of Mechanical Engineering, Graduate School of Tokyo University of Science (Japan), 2 - Tokyo University of Science (Japan), 3 - KYB Corporation (Japan) 18:30-20:00 (1h30) › Influence of Nitrogen on Friction Properties of CNx Coatings Based on First-Principles Molecular Dynamics and Tight-Binding Quantum Chemical Molecular Dynamics Methods - Sato Seiichiro(1), Bai Shandan(1), Higuchi Yugi(1), Ozawa Nobuki(1), Adachi Koshi(2), Martin Jean Michel(3), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Tohoku University (Japan), 2 - Department of Nanomechanics, Tohoku University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 18:30-20:00 (1h30) › Mechanical Response of Coated Surfaces under Severe Contact Loading - Elwafi Ali(1), Al-Sadi Bader(1), Al-Rushdi Azan(1), Barton David C.(2) 1 - Faculty of engineering (Oman), 2 - School of Mechanical Engineering, University of Leeds (United Kingdom) 18:30-20:00 (1h30) › Neutron reflectometry of adsorbed additive layers on (a-C) DLC - Simic Rok(1), Kalin Mitjan(1), Hirayama Tomoko(2) 1 - Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana (Slovenia), 2 - Department of Mechanical Engineering, Doshisha University (Japan) 18:30-20:00 (1h30) › Structure and Properties of Titanium Doped Tungsten Bisulfide Thin Films Produced by Magnetron Co-Sputtering DC Technique - De La Roche Yepes Jhonattan(1), Gonzalez Carmona Juan Manuel(2), Restrepo Parra Elisabeth(1), Sequeda Osorio Federico(2) 1 - Laboratorio de Fisica del Plasma (Colombia), 2 - Laboratorio de recubrimientos duros y aplicaciones industriales (Colombia) 18:30-20:00 (1h30) › The Effect of Si and W Dopants on the Mechanical and Tribological Properties of Diamond-Like Carbon - Austin Louise(1), Neville Anne(1), Liskiewicz Tomasz(1), Tietema Roel(2) 1 - University of Leeds (United Kingdom), 2 - Hauzer Techno Coating BV (Netherlands) 18:30-20:00 (1h30) › Tribological and Electrical Contact Behavior of Metal/DLC Nanocomposite Coating on Brass Substrate - Hombo Ryoichi(1), Takeno Takanori(2), Fontaine Julien(3), Miki Hiroyuki(4), Kato Naoki(1), Nozu Takahiro(1), Inayoshi Naruhiko(1), Belin Michel(3), Takagi Toshiyuki(5) 1 - DENSO CORPORATION (Japan), 2 - Graduate School of Engineering, Tohoku University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 4 - Frontier research Institute for Interdisciplinary Science, Tohoku University (Japan), 5 - Institute of Fluid Science, Tohoku University (Japan) 18:30-20:00 (1h30) › Tribological behaviour of ZrCN PVD and other DLC coatings for engine components - Igartua Amaya(1), Fernandez X.(1), Zabala Borja(1), Ruiz De Gopegui U.(1), Tribotte P.(2), Abramczuk M.(2), Malhaire J.-M.(2) 1 - IK4-Tekniker (Spain), 2 - Renault - Direction de la Recherche, des Etudes Avancées et des Matériaux (France) 18:30-20:00 (1h30) › Tribological performance of Cr/CrN and Cr/CrN/CrAlN multilayer coatings deposited by r.f. magnetron sputtering - Beliardouh Nasser Eddine(1), Bouzid K.(1), Tlili B.(2), Nouveau Corinne(2) 1 - Laboratoire Ingénierie des surfaces (Algeria), 2 - Laboratoire Bourguignon des Matériaux et Procédés (France) 18:30-20:00 (1h30) › Tribological properties of Ti(CN)x hard coating on titanium alloy by pulsed plasma electrolytic carbonitriding process - Qin Yongkun(1), Xiong Dangsheng(1), Li Jianliang(1) 1 - Nanjing University of Science and Technology (China) 18:30-20:00 (1h30) 18:30 - 20:00 (1h30) Posters - Fluid Lubrication › CFD Investigation of hydrodynamic lubrication on textured surface - Effects of interaction between dimples - Oshima Yasutsugu(1), Sasaki Shinya(1), Tsuboi Ryo(1) 1 - Department of Mechanical Engineering Tokyo University of Science (Japan) 18:30-20:00 (1h30) › Combined Experimental and Numerical Study of PTFE Faced Thrust Bearings Considering Effect of Creep on Bearing Performance - Rothwell Benjamin(1), Hewson Rob(1), Neville Anne(1), Morina Ardian(2), Barton David(1) 1 - University of Leeds (United Kingdom), 2 - Institute of Engineering Thermofluids, Surfaces and Interfaces (iETSI) (United Kingdom) 18:30-20:00 (1h30) › Film thickness equations for line-contact thermal elastohydrodynamic lubrication under misaligned loads - Wang Zhijian(1), Chen Xiaoyang(1), Xuejin Shen(1) 1 - School of Mechanical Engineering and Automatic, Shanghai University (China) 18:30-20:00 (1h30) › Finite Line Contacts EHL Analysis of Misaligned Logarithmically Profiled Roller - Park Tae-Jo(1) 1 - Gyeongsang National University (South Korea) 18:30-20:00 (1h30) › High-tech anti-wear lubricant based on carbon nanotube/ionic liquid combination - Taaber Triinu(1)(2), Põhako-Esko Kaija(1)(2), Plaado Margo(1), Saal Kristjan(1), Lõhmus Rünno(1), Mäeorg Uno(2) 1 - University of Tartu, Institute of Physics and Estonian Nanotechnology Competence Center (Estonia), 2 - University of Tartu - Institute of Chemistry (Estonia) 18:30-20:00 (1h30) › Lubricant Rheology Effect on Roughness Behavior in EHL Contacts - Sperka Petr(1), Krupka Ivan(1), Hartl Martin(1) 1 - Brno University of Technology (Czech Republic) 18:30-20:00 (1h30) › Modeling of the edge effects for Main Bearings of a Multi-supporting Crankshaft of an Internal Combustion Engine: the Theory - Rozhdestvenskiy Juriy(1), Zadorozhnaya Elena(1), Khozeniuk Nadezhda(1), Mylnikov Alexander(1), Boyarshinova Alla(1) 1 - South Ural State University (National Research University) (Russia) 18:30-20:00 (1h30) › Research on Causes of Cavitation Generation on Textured Surface under Hydrodynamic Lubrication - Tsuboi Ryo(1), Nakano Akira(1), Sasaki Shinya(1) 1 - Department of Mechanical Engineering Tokyo University of Science (Japan) 18:30-20:00 (1h30) › Thermal Friction Analysis of a Single-Nut Preloaded Ball-Screw - Wei Chin-Chung(1), Horng Jeng-Haur(1) 1 - National Formosa University (Taiwan) 18:30-20:00 (1h30) › Tribological properties of halogen-free ionic liquids against sintered ceramics - Kondo Yuriko(1), Kawada Shohei(1), Watanabe Seiya(1), Tsuboi Ryo(1), Sasaki Shinya(1) 1 - Tokyo University of Science (Japan) 18:30-20:00 (1h30) 18:30 - 20:00 (1h30) Posters - Lubricant Additives › 1,3-Diketone Fluids and their Complexes with Iron - Walter Michael(1)(2), Amann Tobias(2), Li Ke(3), Kailer Andreas(2), Rühe Jürgen(3), Moseler Michael(2) 1 - Freiburg Materials Research Center (Germany), 2 - IWM - Fraunhofer Institute for Mechanics of Materials (Germany), 3 - Department of Microsystems Engineering (Germany) 18:30-20:00 (1h30) › Adsorption of fatty acids on steel and gold surfaces: An in-situ XPS study - Matta Christine(1), Loehlé Sophie(1), Minfray Clotilde(1), Le Mogne Thierry(1), Martin Jean-Michel(1), Iovine Raphaele(2), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - Tohoku University (Japan) 18:30-20:00 (1h30) › Comparative study of tribological behaviour of steel/steel and steel/nanocristallin diamond contacts lubricated by organomolybdenum and ZnDTP - Gorbatchev Olga(1), Fedry Simon(1), De Barros Bouchet Maria-Isabel(1), Le Mogne Thierry(1), Iovine Raphaele(2), Martin Jean Michel(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France) 18:30-20:00 (1h30) › Effect of Lubricant Chemistry on the Camshaft Friction and Follower Rotation - Mufti Riaz(1), Khurram Muhammad(1), Qureshi Farrukh(2), Zahid Rehan(1), Aslam Jawad(1) 1 - National University of Sciences and Technology, School of Mechanical and Manufacturing Engineering (Pakistan), 2 - The Lubrizol Corporation (United States) 18:30-20:00 (1h30) › Effects of iron oxide layers on adsorption mechanism of C18 fatty acid: A computational study - Loehlé Sophie(1), Minfray Clotilde(1), Christine Matta(1), Le Mogne Thierry(1), Martin Jean Michel(1), Iovine Raphaele(2), Obara Yukiko(3), Miura Ryuji(3), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - NICHe (Japan) 18:30-20:00 (1h30) › Experimental analysis of tribological properties of chemically modified bio-based lubricant with nanoparticle additives - Mohd Zulkifli Nurin Wahidah(1), Kalam Md Abul(1), Masjuki Haji Hassan(1), Yunus R.(2) 1 - University of Malaya (Malaysia), 2 - University Putra Malaysia (Malaysia) 18:30-20:00 (1h30) › Impact Study of Fuel Additives in Piston Ring Cylinder Liner Contact - Forest Cyrielle(1), Matta Christine(1), De Barros Bouchet Maria-Isabel(1), Mazarin Michael(2), Le Mogne Thierry(1), Martin Jean Michel(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL Raffinage Marketing (France) 18:30-20:00 (1h30) › Influence of the structural characteristics of IF-MoS2 nanoparticles on their lubrication mechanisms - Imène Lahouij, Lahouij Imène(1), Vacher Béatrice(1), Dassenoy Fabrice(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France)de Tribologie et Dynamique des Systèmes 18:30-20:00 (1h30) › Microencapsulation for Next Generation Lubrication - Mitchell Karen(1), Neville Anne(2), Morina Ardian(1), Cayre Olivier(1), Sutton Mike(3), Walker Gary(3) 1 - University of Leeds (United Kingdom), 2 - Institue of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds (United Kingdom), 3 - Lubrizol Limited (United Kingdom) 18:30-20:00 (1h30) › Optimized Nanolubricant for Friction Reduction - Abdullah Muhammad Ilman Hakimi Chua(1), Abdollah Mohd Fadzli Bin(1), Amiruddin Hilmi(1), Mat Nuri Nur Rashid(1) 1 - Center of Advanced Research on Energy, Universiti Teknikal Malaysia Melaka (Malaysia) 18:30-20:00 (1h30) › Quantum Chemical Molecular Dynamics Simulations of Chemical Mechanical Polishing Processes for Silicon Wafer by SiO2 Abrasive Grain - Kawaguchi Kentaro(1), Yuji Higuchi(1), Nobuki Ozawa(1), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Tohoku University (Japan) 18:30-20:00 (1h30) › Speed-Dependent Friction Characteristic of ZnDTP Having Linear Hydrocarbon Moiety - Aoki Saiko(1), Suzuki Akihito(1), Kubouchi Masatoshi(1), Masuko Masabumi(1) 1 - Tokyo Institute of Technology, Department of Chemical Engineering, Graduate School of Science and Engineering (Japan) 18:30-20:00 (1h30) › Study of GMO concentration on the boundary lubricated W-doped DLC coatings - Yang Liuquan(1), Neville Anne(1), Brown Alisdair(2), Ransom Paul(2), Morina Ardian(1) 1 - Institute of Engineering Thermofluids, Surfaces and Interfaces (iETSI) (United Kingdom), 2 - Afton Chemical Limited (United Kingdom) 18:30-20:00 (1h30) › The research on tribological behaviors of lubricating oil in TFL - Zhang Jie(1) 1 - Center of Lubricants Research and Development, Petrochina (China) 18:30-20:00 (1h30) › Towards a better understanding of warm mix asphalt additives - Geisler Flavien(1)(2), Lapalu Laurence(2), Kapsa Philippe(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France) 18:30-20:00 (1h30) › Tribological behaviour of fullerene-like MoS2 nanoparticles for different lubrication regimes in the presence of dispersants - Rabaso Pierre(1)(2)(3), Ville Fabrice(3), Dassenoy Fabrice(2), Martin Jean Michel(2), Diaby Moussa(1) 1 - PSA Peugeot - Citroën (France), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 3 - Laboratoire de Mécanique des Contacts et des Structures (France) 18:30-20:00 (1h30) 18:30 - 20:00 (1h30) Posters - Materials for Tribology › A micromechanical approach for the wear prediction of fiber-reinforced composites - Yang Dan(1), Gu Shui-Tao(1), He Qi-Chang(2) 1 - School of Mechanical Engineering, Tribology Research Institute, Southwest Jiaotong University (China), 2 - Université Paris-Est, Laboratoire Modélisation et Simulation Multi Echelle (France) 18:30-20:00 (1h30) › Alloying process for Cu-Zn mixed powder using the tribo-mechanical approach - Miki Hiroyuki(1), Sakuma Tomoya(2), Nakayama Noboru(3), Miyazaki Takamichi(4), Takeishi Hiroyuku(2) 1 - Frontier research Institute for Interdisciplinary Science, Tohoku University (Japan), 2 - Science and Mechanical Department, Chiba Institute of Technology (Japan), 3 - Mechanical Systems Engineering Department, Shinshu University (Japan), 4 - Technical Division, School of Engineering, Tohoku University (Japan) 18:30-20:00 (1h30) › An Experimental Study of the Impact Erosion for high Pressure pipe Manifold - Fan Jianchun(1), Zhang Jixin(1), Zhang Laibin(1), Xie Yongjin(2), Wu Hanchun(2) 1 - China University of Petroleum (China), 2 - SJ Petroleum Machinery Corporation (China) 18:30-20:00 (1h30) › Biomimetic Sealing System for Power Generation from Natural Energy - Nakanishi Yoshitaka(1), Shimazu Kenryo(1), Mine Syouji(1), Oka Yuichi(1), Matsumoto Yasuaki(1), Higaki Hidehiko(2) 1 - Kumamoto University (Japan), 2 - Kyushu Sangyo University (Japan) 18:30-20:00 (1h30) › CANCELLED - Wear Measurement and Analysis of Explanted Acetabular Cups - Uddin Mohammad(1) 1 - School of Engineering, University of South Australia (Australia) 18:30-20:00 (1h30) › Comparative Tribological study of biomaterials AISI 316L and Ti6Al7Nb - Fellah Mamoun(1), Labaïz Mohamed(1), Assala Omar(1), Iost Alain(2) 1 - Surface Engineering and Tribology Team, Laboratory of Metallurgy and Engineering Materials (Algeria), 2 - Laboratoire de Mécanique de Lille (France) 18:30-20:00 (1h30) › Correlations between wear mechanisms and rail grinding operations. - Cuervo P. A.(1), Santa J.F.(2)(1), Toro A(1) 1 - Universidad Nacional de Colombia (Colombia), 2 - Instituto Tecnológico Metropolitano (Colombia) 18:30-20:00 (1h30) › Development of a novel component test to investigate railway switch slide baseplate tribology - Beagles Adam(1), Lewis Roger(1), Fletcher David(1) 1 - The University of Sheffield (United Kingdom) 18:30-20:00 (1h30) › Effect of heat dissipaters in a NA disc brake pad - Wear performance and influence on µ sensitivity towards pressure and speed - Thiyagarajan V.(1), Kalaichelvan K.(1) 1 - Department of Production Technology, Madras Institute of Technology (India) 18:30-20:00 (1h30) › Effect of Temperature on the Tribological Properties of the Polyimide Composites Reinforced with Different Fibres in Sliding and Erosive Conditions - Zhao Gai(1), Antonov Maksim(1), Hussainova Irina(1), Wang Qihua(2), Wang Tingmei(2) 1 - Tallinn University of Technology (Estonia), 2 - State Key Laboratory of Solid Lubrication (China) 18:30-20:00 (1h30) › Field measurement of coefficient of friction in rails using a hand-pushed tribometer - Areiza Yuliana(1), Santa J.F.(1)(2), Toro A.(1), Garcés S.i(1), Vargas G.(1) 1 - Universidad Nacional de Colombia (Colombia), 2 - Instituto Tecnológico Metropolitano (Colombia) 18:30-20:00 (1h30) › Mechanical Characteristic Analysis of Micro-gear Meshing Transmission - Zhenlu Wang(1), Xuejin Shen(1), Xiaoyang Wang(1), Yi Hu(1) 1 - Shanghai University (China) 18:30-20:00 (1h30) › Micro-contact parameters and specific dissipated friction power during self-mating reciprocating sliding wear tests of a martensitic steel - Stickel Daniel(1), Fischer Alfons(1) 1 - University of Duisburg-Essen (Germany) 18:30-20:00 (1h30) › Modeling of the abrasive tool wear in metal cutting: Influence of the sliding-sticking contact zones - Halila Faycel(1)(2), Nouari Mohammed(1)(2), Czarnota Christophe(3) 1 - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée (France), 2 - École Nationale Supérieure des Mines d'Albi-Carmaux (France), 3 - Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (France) 18:30-20:00 (1h30) › Prevent/Limit Edge Loading in Total hip Replacement - Torabi Kachousangi Ehsanollah(1), Asadirad Reyhaneh(1), Mao Ken(1) 1 - The University of Warwick - School of Engineering (United Kingdom) 18:30-20:00 (1h30) › Study of nitrided steel R6M5 abrasive wear-resistance - Rakhadilov Bauyrzhan(1), Skakov Mazhyn(1), Shceffler Michael(2) 1 - D. Serikbayev East Kazakhstan state technical university (Kazakhstan), 2 - Otto-von-Guericke University Magdeburg (Germany) 18:30-20:00 (1h30) › Synergy between tribo-oxidation Mechanically Mixed Layer (MML) and strain rate response on governing the dry sliding wear behavior of Ti-6Al-4V against SS316L - Jayachandran Ashok Raj(1), Deb Anindya(1), Kailas Satish V.(1) 1 - Indian Institute of Science (India) 18:30-20:00 (1h30) › The development of friction tester in pressurized hot water at 30 MPa and 300 degree C - Yagi Yuji(1), Tokoroyama Takayuki(1), Umehara Noritsugu(1), Inayoshi Naruhiko(2), Sasaki Keiji(2) 1 - Department of Mechanical Science and Engineering (Japan), 2 - DENSO CORPORATION (Japan) 18:30-20:00 (1h30) › The Running-in Behavior of AlSi as a function of Si morphology and final machining - Linsler Dominic(1), Scherge Matthias(1) 1 - MikroTribologie Centrum (Germany) 18:30-20:00 (1h30) › Wear phenomena and simulation of hot shearing process - Varga Markus(1), Torres H.(1), Horwatitsch D.(2), Merstallinger A.(3), Adam K.(3), Badisch E.(1) 1 - AC2T research GmbH (Austria), 2 - LKR Leichtmetallkompetenzzentrum Ranshofen GmbH (Austria), 3 - Aerospace & Advanced Composites GmbH (Austria) 18:30-20:00 (1h30) 18:30 - 20:00 (1h30) Posters - Surface Engineering › A benchmark of filtering methods for tribological surfaces - Le Goic Gaetan(1), Bigerelle Maxence(2), Favrelière Hugues(1), Samper Serge(1) 1 - Laboratoire SYstèmes et Matériaux pour la MEcatronique (France), 2 - Thermique, Ecoulement mécanique, Matériaux, Mise en forme, PrOduction (France) 18:30-20:00 (1h30) › Application of Surface Modification for Airplanes Winglets - Ibrahim Zaharah(1), Osman M.shahril(1), Khan Amir Azam(1), Ibrahim M. Danial(1), Miyanaga Norifumi(2) 1 - Universiti Malaysia Sarawak (Malaysia), 2 - Waseda University (Japan) 18:30-20:00 (1h30) › Consideration of combined water intrusion/drainage effects in the prediction of road skid resistance - Do Minh-Tan(1), Prevost Delphine(2), Cerezo Veronique(1), Chabanon Christian(2) 1 - IFSTTAR (France), 2 - RENAULT (France) 18:30-20:00 (1h30) › Decomposition of a tribological system by chaos theory - Bigerelle Maxence(1), Nianga Jean Marie(2), Iost Alain(2) 1 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France), 2 - Laboratoire de Mécanique de Lille (France) 18:30-20:00 (1h30) › Friction and material transfer of a textured wafer surface during sliding - Xiao H.(1), Wang K.(2), Belin Michel(3), Fontaine Julien(3), Liang Hong(1) 1 - Mechanical Engineering (United States), 2 - Materials Science and Engineering, Texas A&M University (United States), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 18:30-20:00 (1h30) › In-situ observation of the friction/water depth relationship - Cerezo Veronique(1), Bouteldja Mohamed(2), Prevost Delphine(3), Do Minh-Tan(1) 1 - IFSTTAR (France), 2 - Département Laboratoire de Lyon (France), 3 - RENAULT (France) 18:30-20:00 (1h30) › Laboratory test to evaluate the effect of contaminants on road skid resistance - Do Minh-Tan(1), Cerezo Veronique(1), Zahouani Hassan(2) 1 - IFSTTAR (France), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 18:30-20:00 (1h30) › Microstructure and wear resistance changes of 30CrMnSiA steel modified surface layers by electrolyte-plasma processing - Skakov Mazhyn(1), Zhurerova Laila(1), Scheffler Michael(2) 1 - D. Serikbaev East Kazakhstan State Technical University (Kazakhstan), 2 - Institute of Materials and Joining Technology of Otto von Guericke University (Germany) 18:30-20:00 (1h30) › Numerical Modeling for Cold Sprayed Particle Deposition - Xie Jing(1), Nelias Daniel(1), Walter-Le Berre Hélène(1), Ito Kiyohiro(2), Ichikawa Yuji(2), Ogawa Kazuhiro(2) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Tohoku University (Japan) 18:30-20:00 (1h30) › Relationship between brightness and roughness of polypropylene abraded surfaces - Najjar Denis(1), Van Gorp Adrien(2), Bigerelle Maxence(3) 1 - Ecole Centrale de Lille (France), 2 - Centre Arts et Métiers ParisTech de Lille (France), 3 - Université de Valenciennes et du Hainaut Cambrésis (France) 18:30-20:00 (1h30) › Roughness and Wetting, a Multiscale Approach - Belaud Vanessa(1), Bigerelle Maxence(2)(3), Valette Stephane(1), Stremsdoerfer Guy(1), Benayoun Stephane(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - Laboratoire de Thermique, des Ecoulements, de Mécanique et Matériaux en Mise en Forme et Production (France), 3 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France) 18:30-20:00 (1h30) › Running-in process of Si-SiOx/SiO2 pair at nanoscale - Qian Linmao(1), Chen Lei(1), Kim Seong H.(2), Wang Xiaodong(1) 1 - Tribology Research Institute, National Traction Power Laboratory, Southwest Jiaotong University (China), 2 - Department of Chemical Engineering, The Pennsylvania State University (United States) 18:30-20:00 (1h30) › Scuffing of spiral bevel gears - Kalbarczyk Marek(1), Tuszynski Waldemar(1), Szczerek Marian(1), Michalczewski Remigiusz(1) 1 - ITeE-PIB (Poland) 18:30-20:00 (1h30) › The Representative Topography of Worn Hot Rolling Mill Cylinders - Luc Emilie(1), Bigerelle Maxence(2), Deltombe Raphaël(2) 1 - APERAM Stainless Services and Solutions (France), 2 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France) 18:30-20:00 (1h30) › Topographical and ellipsometrical analysis of orange peel on polished steel surfaces - Miranda-Medina Maria(1), Somkuti Peter(1), Jech Martin(1), Vernes András(2) 1 - Austrian Center of Competence for Tribology (Austria), 2 - Institute of Applied Physics, Vienna University of Technology (Austria) 18:30-20:00 (1h30) › Topographical Model Selection in Tribology - Tchoundjeu Stéphane(1)(2), Bigerelle Maxence(3), Robbe-Valloire François(2), Da Silva T.(2), Jarnias Frédéric(1) 1 - Total Supply Marketing (France), 2 - Laboratoire d'Ingénierie des Systèmes Mécaniques et des MAtériaux (France), 3 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France) 18:30-20:00 (1h30) › Tribological Performance of PTFE + Taillings of Scheelite Composites - Juliana Souza Juliana(1), De Sá Leitão N. C. M. C.(1), De Azevedo M. S. P.(1), De Azevedo L. S. P.(1), Oliveira P. M.(1), De Medeiros J. T. N.(1), Matamoros E. P.(1) 1 - Federal University of Rio Grande do Norte (Brazil), Federal University of Rio Grande do Norte 18:30-20:00 (1h30) › Wear Behavior of Magnesium Alloys AZ31B and its Composites - Nguyen Q.B.(1), Lim C.Y.h(1) 1 - Department of Mechanical Engineering, National University of Singapore (Singapore) 18:30-20:00 (1h30)	Plenary conference 8:30 - 9:15 (45min) Plenary conference CARACAS - BRASILIA Chairman: P. Vergne › Towards an atomic scale understanding of wear in carbon materials and metals - Michael Moseler, MikroTribologie Centrum 08:30-09:15 (45min) Break 9:15 - 9:35 (20min) Break T5/6 - Diamond-Like Carbon: Solid and boundary lubrication T1 - Biotribology II T2 - Surface texturing I 9:35 - 10:55 (1h20) T5/6 - Diamond-Like Carbon: Solid and boundary lubrication CARACAS - BRASILIA Chairmen: M. Kubo and J.-L. Mansot › First-Principles Calculation on the Structure Transition of Diamond to Graphene in Si-Doped DLC - Bai Shandan(1), Zhang Qi(2)(1), Kobayashi Yoshihiko(1), Sato Seiichiro(1), Higuchi Yuji(1), Ozawa Nobuki(1), Adachi Koshi(3), Martin Jean Michel(4), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Graduate School of Engineering, Tohoku University (Japan), 2 - Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, School of Mechanical Engineering, Xi'an Jiaotong University (China), 3 - Department of Nanomechanics, Graduate School of Engineering, Tohoku University (Japan), 4 - Laboratoire de Tribologie et Dynamique des Systemes, Ecole Centrale de Lyon (France) 09:35-09:55 (20min) › Investigating the Tribochemistry of Silicon Oxide-Doped Diamond-Like Carbon: from Ultra-High Vacuum Systems to the International Space Station - Mangolini Filippo(1), Krick Brandon(2), Sawyer W. Gregory(2), Scharf Thomas(3), Ohlhausen James(4), Prasad Somuri(4), Hilbert James(5), Fontaine Julien(6), Carpick Robert(5) 1 - Department of Materials Science and Engineering, University of Pennsylvania (United States), 2 - Department of Mechanical and Aerospace Engineering, University of Florida (United States), 3 - Department of Materials Science and Engineering, University of North Texas (United States), 4 - Sandia National Laboratories (United States), 5 - Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania (United States), 6 - Laboratoire de Tribologie et Dynamique des Systèmes, Ecole Centrale de Lyon (France) 09:55-10:15 (20min) › Formation process of metal-rich tribo-film on the counter face during sliding against metal/diamondlike-carbon nanocomposite coatings - Minoru Goto(1), Ito Kosuke(2), Fontaine Julien(3), Takeno Takanori(4), Miki Hiroyuki(5) 1 - Ube National College of Technology (Japan), 2 - College of Engineering, Nihon University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 4 - Graduate School of Engineering, Tohoku University (Japan), 5 - Center for Interdisciplinary Research, Tohoku University (Japan) 10:15-10:35 (20min) › The Origin of the Tribofilm Formed in DLC/MAC Lubrication Using 13C-DLC - Iwaki Masanori(1), Takeno Takanori(2), Miki Hiroyuki, Takagi Toshiyuki(3) 1 - Japan Aerospace Exploration Agency (Japan), 2 - Graduate School of Engineering, Tohoku University (Japan), 3 - Institute of Fluid Science, Tohoku University (Japan) 10:35-10:55 (20min) 9:35 - 10:55 (1h20) T1 - Biotribology II LIMA Chairwoman: A. Neville › Friction of 316L Stainless Steel on Soft-tissue-like Poly (vinyl alcohol) Hydrogel in Physiological Liquid - Kosukegawa Hiroyuki(1), Fridrici Vincent(2), Laurenceau Emmanuelle(2), Kapsa Philippe(3), Ohta Makoto(1) 1 - Tohoku University (Japan), 2 - Ecole Centrale de Lyon (France), 3 - Ecole Centrale de Lyon (France) 09:35-09:55 (20min) › Tribological study of oral care silica - Descartes Sylvie(1), Courtieux Laure(2), Peditto Francesca(3) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Département Génie Mécanique et Développement (France), 3 - Solvay Silica (France) 09:55-10:15 (20min) › CANCELLED - Comparison of Sliders for Tactile Friction Measurements - Henson Brian(1), Cervera Guillaume(2), Feng Zhichao(3) 1 - School of Mechanical Engineering, University of Leeds (United Kingdom), 2 - Département Génie Mécanique Développement, INSA de Lyon (France), 3 - The University of Hong Kong (Hong Kong SAR China) 10:15-10:35 (20min) 9:35 - 10:55 (1h20) T2 - Surface texturing I MEXICO Chairman: M. Priest › Relation between roughness and surface hardening after ultrasonic shot peening - Marteau Julie(1), Bigerelle Maxence(2) 1 - Laboratoire Roberval (France), 2 - Laboratoire d'automatique et de mécanique industrielles et humaines (France) 09:35-09:55 (20min) › Surface Characterization of Ultrasonic Shot Peening Surface - Marteau Julie(1), Bigerelle Maxence(2), Mazeran Pierre-Emmanuel(1) 1 - Laboratoire Roberval (France), 2 - Laboratoire d'automatique et de mécanique industrielles et humaines (France) 09:55-10:15 (20min) › Quantitative approach to determine the mechanical properties of sandblasted materials by nanoindentation - Xia Yang(1), Bigerelle Maxence(2), Bouvier Salima(1), Iost Alain(3) 1 - Laboratoire Roberval (France), 2 - Laboratoire d'automatique et de mécanique industrielles et humaines (France), 3 - Laboratoire de Mécanique de Lille (France) 10:15-10:35 (20min) › CANCELLED - Influence of machining-induced 3D surface roughness on component's performance - Zeng Quanren(1)(2), Liu Geng(1), Liu Lan(1), Qin Yi(2) 1 - Northwestern Polytechnical University (China), 2 - University of Strathclyde (United Kingdom) 10:35-10:55 (20min) Coffee break 10:55 - 11:10 (15min) Coffee break T5/6 - Organic films and additives T3 - Thermal effects on special materials in tribology T2 - Surface texturing II 11:10 - 12:30 (1h20) T5/6 - Organic films and additives CARACAS - BRASILIA Chairmen: S. Mori and M.C. Righi › Oil-Compatible Polymer-Brush Coatings for Lubrication - Bielecki Robert(1), Espinosa-Marzal Rosa(1), Spencer Nicholas(1) 1 - ETH Zurich, Department of Materials, Laboratory for Surface Science and Technology (Switzerland) 11:10-11:30 (20min) › Ab initio adsorption of organic additives on an iron surface - Bedolla Velazquez P.(1), Eder S.(2), Dörr N.(2), Vernes Andras(2)(1) 1 - Institute of Applied Physics, Vienna University of Technology (Austria), 2 - Austrian Center of Competence for Tribology (Austria) 11:30-11:50 (20min) › In-situ observation of additive concentration and molecular interaction in EHL contact using micro-FTIR - Koji Takiwatari(1), Hoshi Yasushi(2), Nanao Hidetaka(2), Mori Shigeyuki(2) 1 - Department of Chemical Engineering, Ichinoseki National Collage of Technology (Japan), 2 - Department of Chemistry and Bioengineering, Faculty of Engineering, Iwate University (Japan) 11:50-12:10 (20min) › Coupling experimental and numerical approaches to study adsorption mechanism of stearic acid on iron based surfaces - Minfray Clotilde(1), Loehlé Sophie(1), Matta Christine(1), Le Mogne Thierry(1), Martin Jean Michel(1), Iovine Raphaele(2), Obara Yukiko(3), Miura Ryuji(3), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - Tohoku University (Japan) 12:10-12:30 (20min) 11:10 - 12:30 (1h20) T3 - Thermal effects on special materials in tribology LIMA Chairman: F. Kennedy › Experimental Validation of a Thermal Model of a LOx Flooded Ball Bearing - Servais Christophe (1), Bozet Jean-Luc(1) 1 - Université de Liège (Belgium) 11:10-11:30 (20min) › Tribological Conditions leading to the Ignition of an Energetic Material - Charlery Rudy(1), Saulot Aurelien(1), Daly Nicolas(2), Berthier Yves(1) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - HERAKLES, Groupe SAFRAN (France) 11:30-11:50 (20min) › Selective choice of high temperature wear resistant materials - Varga Markus(1), Zikin A.(1), Hornung J.(2), Kirchgassner M.(2), Adam K.(3), Badisch E.(1) 1 - AC2T research GmbH (Austria), 2 - Castolin GmbH, IZ-NOE SUED (Austria), 3 - Voestalpine Stahl GmbH (Austria) 11:50-12:10 (20min) › The Thermal Properties of Polyaryletherketones (PAEKs) and their Influence on Tribological Performance - Dyson Christopher(1)(2), Fox Malcolm(1), Hopkins Bill(3), Priest Martin(1) 1 - iETSI, School of Mechanical Engineering, University of Leeds (United Kingdom), 2 - ROCOL Lubricants (United Kingdom), 3 - ROCOL Lubricants (United Kingdom) 12:10-12:30 (20min) 11:10 - 12:30 (1h20) T2 - Surface texturing II MEXICO Chairman: E. Ciulli › Tribological behaviors of textured surfaces under lubricated point contact conditions - Pawlus Pawel(1), Dzierwa Andrzej(1), Koszela Waldemar(1), Mathia Thomas G.(2) 1 - Rzeszow University of Technology (Poland), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 11:10-11:30 (20min) › Identification of lubrication regime on textured surfaces by multi-scale decomposition - Hubert Cedric(1), Kubiak K. J.(2), Bigerelle Maxence(1), Dubois A.(1), Dubar L.(1) 1 - Thermique, Ecoulement mécanique, Matériaux, Mise en forme, PrOduction (France), 2 - University of Liverpool, School of Engineering (United Kingdom) 11:30-11:50 (20min) › Tribological Properties of PTFE / Laser Surface textured Stainless Steel under Lubrication - Xiong Dangsheng(1), Qin Y.k.(1), Li J.l.(1), Wang Y.(1) 1 - Nanjing University of Science and Technology (China) 11:50-12:10 (20min) › Tribological comparison of three typical wrinkled surface on the elastomeric polymer - Xiaoli Zhao(1), Weiwei An(2), Dezhi Zheng(1), Le Gu(1), Liqin Wang(1) 1 - Harbin Institute of Technology (China), 2 - Northeast Forestry University (China) 12:10-12:30 (20min) Lunch (group picture at 13:30) 12:30 - 14:00 (1h30) Lunch (group picture at 13:30) T5/6 - Tribochemistry of sulfur and phosphorous compounds T4 - TTS and Material evolution T1 - Complex fluids I 14:00 - 15:50 (1h50) T5/6 - Tribochemistry of sulfur and phosphorous compounds CARACAS - BRASILIA Chairmen: M. Kalin and E. Tysoe › Ab initio investigation of atomistic mechanisms in solid and boundary lubrication - Righi Maria Clelia(1), Zilibotti G.(1), Corni S(1), De Barros-Bouchet Maria-Isabel(2), Philippon David(2), Mambingo-Doumbe Samuel(2)(3), Le Mogne Thierry(2), Martin Jean-Michel(2), Bouffet A.(3) 1 - CNR Institute of Nanoscience (Italy), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 3 - TOTAL, Centre de Recherche de Solaize (France) 14:00-14:30 (30min) › Wear and sulphur chemistry of the tribolayer - Jech Martin(1), Lenauer Claudia(1), Salopek Sara(1), Tomastik Christian(1), Wopelka Thomas(1) 1 - AC²T research GmbH (Austria) 14:30-14:50 (20min) › Tribochemical mechanism of superlubricity of phosphoric acid: a reactive molecular dynamics study - Yue Dachuan(1), Ma Tianbao(1) 1 - State Key Laboratory of Tribology, Tsinghua University (China) 14:50-15:10 (20min) › Tribological performance of DLC/cast iron and steel/cast iron system when lubricated in fully formulated oils with different concentration of MoDTC-type friction modifier. - Kosarieh Shahriar(1), Morina Ardian(1), Neville Anne(1), Flemming Jonathan(2), Laine Emmanuel(2) 1 - University of Leeds (United Kingdom), 2 - Infineum UK Limited (United Kingdom) 15:10-15:30 (20min) › Real time MoS2 formation and friction performance - Rai Yugal(1), Morina Ardian(1), Neville Anne(1) 1 - University of Leeds (United Kingdom) 15:30-15:50 (20min) 14:00 - 15:50 (1h50) T4 - TTS and Material evolution MEXICO Chairman: F. Lebon › A thermo-mechanical model for TSTs based on TRIP, and numerical treatment - Lebon Frederic(1), Antoni Grégory(1), Désoyer Thierry(1) 1 - Laboratoire de Mécanique et d'Acoustique (France) 14:00-14:30 (30min) › Role of white etching layer on rail squat formation - Simon Samuel(1)(2), Saulot Aurélien(1), Quost Xavier(2), Berthier Yves(1) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - RATP (France) 14:30-14:50 (20min) › CANCELLED - Study of modified layers on 316L steel created by friction stir process - Langlade Cécile(1), Roman Adriana(1), Schlegel Daniel(2)(3), Gete Eric(1), Folea Milena(4) 1 - IRTES - LERMPS (France), 2 - IRTES - M3M (France), 3 - Ecole Supérieure des Technologies et des Affaires (France), 4 - Université Transilvania de Brasov (Roumania) 14:50-15:10 (20min) › Understanding White Etching Cracks (WEC) in rolling element bearings: the effect of hydrogen charging - Ruellan Arnaud(1)(2)(3), Ville Fabrice(1), Kleber Xavier(2), Arnaudon Aurélien(3), Liatard Bernard(3) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Matériaux, ingénierie et sciences (France), 3 - NTN-SNR, R&D center (France) 15:10-15:30 (20min) › Subsurface Deformation and Structural Changes during Scuffing of Steel - Li H.(1), Yagi K.(2), Sugimura J.(2), Kajita S.(3), Shinyoshi T.(4) 1 - Department of Hydrogen Energy Systems, Faculty of Engineering, Kyushu University (Japan), 2 - Department of Mechanical Engineering, Graduate School of Engineering, Kyushu University (Japan), 3 - Toyota Central R&D Labs., Inc (Japan), 4 - Toyota Motor Corporation (Japan) 15:30-15:50 (20min) 14:10 - 15:50 (1h40) T1 - Complex fluids I LIMA Chairman: M. Fox › Ice Lubrication for Transporting Heavy Stones to the Forbidden City in 15th - 16th Century China - Li Jiang(1), Chen Haosheng(2), Stone Howard(3) 1 - University of Science and Technology Beijing (China), 2 - Tsinghua University (China), 3 - Princeton University (United States) 14:10-14:30 (20min) › How does the water mixed with Ionic Liquids behave under lubricating condition? - Watanabe Seiya(1), Nakano M(2)., Miyake K(2)., Tsuboi R(1)., Sasaki S(1). 1 - Department of Mechanical Engineering, Tokyo University of Science (Japan), 2 - National Institute of Advanced Industrial Science and Technology (AIST) (Japan) 14:30-14:50 (20min) › CANCELLED - Halogen-Free Ionic Liquids Composed of Bis(salicylato)borate Anion as Lubricants Additive - Gusain Rashi(1), Singh R(1)., Shivkumar L(1)., Saran S(1)., Gupta P(1)., Khatri Om(1) 1 - CSIR-Indian Institute of Petroleum, Dehradun (India) 14:50-15:10 (20min) › Study on Ionic Liquids in the Electric Field - Kawada Shouhei(1), Watanabe Seiya(1), Kondo Yuriko(1), Tsuboi Ryo(1), Sasaki Shinya(1) 1 - Department of Mechanical Engineering, Tokyo University of Science (Japan) 15:10-15:30 (20min) › Electrochemical control of lubrication by ionic liquids - Bennewitz Roland(1), Hausen Florian(1), Sweeney James(2), Hayes Robert(2), Webber Grant(2), Endres Frank(3), Rutland Mark(4), Atkin Rob(2) 1 - INM - Leibniz Institute for New Materials (Germany), 2 - University of Newcastle, Australia (Australia), 3 - TU Clausthal-Zellerfeld (Germany), 4 - Royal Institute of Technology (Sweden) 15:30-15:50 (20min) Refreshment 15:50 - 16:10 (20min) Refreshment T5/6 - Complex tribochemical environments T3 - Thermal effects on highly loaded contacts T2 - Surface roughness: Modelling 16:10 - 18:00 (1h50) T5/6 - Complex tribochemical environments CARACAS - BRASILIA Chairman: N. Spencer and M. Goto › Ionic Liquids-Graphene composite carbon-based lubricating films - Xue Qunji(1), Wang Liping(1) 1 - State Key Laboratory of Solid Lubrication (China) 16:10-16:40 (30min) › Surface-analytical investigation of boundary films formed in silica contacts lubricated by trifluoro tris(pentafluoroethyl) phosphate-based ionic liquids - Arcifa Andrea(1), Rossi Antonella(1)(2), Espinosa-Marzal Rosa(1), Spencer Nicholas(1) 1 - Laboratory for Surface Science and Technology, Department of Materials, ETH (Switzerland), 2 - Università degli Studi di Cagliari (Italy) 16:40-17:00 (20min) › First-Principles Calculation on CMP Process of Glass Surface by CeO2 Particle and Design of Alternative Abrasive Grain - Ozawa Nobuki(1), Nakamura Miho(1), Kawaguchi Kentaro(1), Higuchi Yuji(1), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Graduate School of Engineering, Tohoku University (Japan) 17:00-17:20 (20min) › Fretting corrosion comparison between 316L SS and CoCrMo alloys.Effect of Ti content on cast alloys CoCrMo - Geringer Jean(1,) Nakahara Shintaro(2) Yarushima Takayuki(2) 1 - École Nationale Supérieure des Mines de Saint-Étienne (France) 2 - Department of Material Processing, Tohoku University (Japan) 17:20-17:40 (20min) › Reliability enhancements in hard disk drives using in-situ vapor phase additives - Raman Vedantham(1) Nguyen Thomas(1), Escobar Jorge(1) 1 - Hitachi Global Storage Technologies (United States) 17:40-18:00 (20min) 16:10 - 18:00 (1h50) T3 - Thermal effects on highly loaded contacts LIMA Chairman: J.-L. Bozet › Contact temperatures during sliding contact and their influence on wear - Kennedy Francis E.(1) 1 - Thayer School of Engineering (United States) 16:10-16:40 (30min) › Bichromatic measurement of thermal fields induced by friction - Berté Emmanuel(1), Desplanques Yannick(1), Boidin Xavier(1), Witz Jean-François(1), Dufrénoy Philippe(1) 1 - Laboratoire de Mécanique de Lille (France) 16:40-17:00 (20min) › Effect of Temperature on Micro-Pitting Strength of Carburized Steel - Hirano Masahiro(1), Ohno Kousaku(1), Iwamoto Yasuhiro(2) 1 - Hitachi, Ltd. Hitachi Research Laboratory (Japan), 2 - Hitachi Nico Transmission Co., Ltd. (Japan) 17:00-17:20 (20min) › Identification of thermal/friction laws governing the tool-workmaterial interface behaviour and their integration in a FE code for machining processes analyses - Haddag Badis(1) Samir Atlati(1) Mohammed Nouari (1) 1 - Laboratoire d'Énergétique et de Mécanique Théorique et Appliquée (France) 17:20-17:40 (20min) › Erosive wear behavior of steel and iron material under the stress state - Sun Bingcai(1), Fan Jianchun(1), Wen Dong(1), Zhang Laibin(1), Chen Yingying(1) 1 - China University of Petroleum-Beijing (China) 17:40-18:00 (20min) 16:20 - 18:00 (1h40) T2 - Surface roughness: Modelling MEXICO Chairman: K. Venner › Determination of the Friction Coefficient of Mixed Lubricated Contacts by Means of the Finite Element Analsyis - Lorentz Benoit(1), Reichert Stephan(1), Albers Albert(1) 1 - Karlsruhe Institute of Technology (Germany) 16:20-16:40 (20min) › Multiresolution analysis of tribological surfaces - Bianchi D.(1), Betz G.(2), Vernes Andras(1)(2) 1 - Austrian Center of Competence for Tribology (Austria), 2 - Institute of Applied Physics, Vienna University of Technology (Austria) 16:40-17:00 (20min) › New averaged Reynolds equation based on wall slip boundary conditions - Fatu Aurelian(1), Hajjam Mohamed(1) 1 - Institut Pprime (France) 17:00-17:20 (20min) › On the modeling of two bonded silicon surfaces - Cocheteau Natacha(1), Lebon Frederic(1), Maurel Pantel Aurélien(1), Rosu Iulian(1), Ait Zaid Sonia(2), Savin Delarclause Isabelle(2) 1 - Laboratoire de Mécanique et d'Acoustique (France), 2 - Centre National d'Etudes Spatiales (France) 17:20-17:40 (20min) › A model of watertight based on fluid movement percolation on 3D rough surfaces - Deltombe Raphaël(1), Bigerelle Maxence(1)(2), Jourani Abdeljalil(3) 1 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France), 2 - Laboratoire de Thermique, des Ecoulements, de Mécanique et Matériaux en Mise en Forme et Production (France), 3 - Université de Technologie de Compiègne (France) 17:40-18:00 (20min) Banquet (bus transportation is organized) 19:00 - 22:30 (3h30) Banquet (bus transportation is organized)	T5/6 - Diamond-Like Carbon: Structural and chemical modifications T2 - Surface roughness and lubrication T1 - Complex fluids II 8:30 - 10:00 (1h30) T5/6 - Diamond-Like Carbon: Structural and chemical modifications CARACAS - BRASILIA Chairman: M. Chandross and J. Fontaine › Tribochemical Reaction Dynamics of Diamond-Like Carbon and Its Related Materials by First-Principles and Tight-Binding Quantum Chemical Molecular Dynamics Simulations - Kubo Momoji(1), Kobayashi Yoshihiko(1), Sato Seiichiro(1), Bai Shandan(1), Higuchi Yuji(1), Ozawa Nobuki(1), Martin Jean Michel(2) 1 - Fracture and Reliability Research Institute, Graduate School of Engineering,Tohoku University (Japan), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 08:30-09:00 (30min) › In situ Observation of the Structural Changes of DLC during Friction Motion - Sasaki Keiji(1), Kida Naomi(1), Inayoshi Naruhiko(1) 1 - Denso Corporation (Japan) 09:00-09:20 (20min) › Role of graphite-like tribofilm on the friction reduction of DLC films - Ma Tianbao(1) 1 - State Key Laboratory of Tribology, Tsinghua University (China) 09:20-09:40 (20min) › Adsorption of polar molecules on DLC coatings - Kalin Mitjan(1), Simic Rok(1), Hirayama Tomoko(2) 1 - Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana (Slovenia), 2 - Department of Mechanical Engineering, Doshisha University (Japan) 09:40-10:00 (20min) 8:30 - 10:00 (1h30) T2 - Surface roughness and lubrication MEXICO Chairman: G. Morales-Espejel › Surface roughness effects in elastohydrodynamic lubrication - Morales-Espejel Guillermo E.(1) 1 - SKF Engineering and Research Center (Netherlands) 08:30-09:00 (30min) › Study DLC coating influence on lubrication regime transition - Héau Christophe(1), Gachon Yves(1), Maurin-Perrier Philippe(1) 1 - IREIS (France) 09:00-09:20 (20min) › Effects of Surface Ridges on EHL Films under Impact Loading - Nishikawa Hiroshi(1), Tsuda Satoshi(1), Shimada Takahito(1), Kaneta Motohiro(2) 1 - Kyushu Institute of Technology (Japan), 2 - Brno University of Technology (Czech Republic) 09:20-09:40 (20min) › Effect of Lubricity of Drilling Fluids on Buckling and Lockup of Coiled Tubing in Drilling Operations - Abdo Jamil(1), Danish Haneef(1), Al-Shabibi Abdullah(1), Al-Sharji Hamed(2) 1 - Sultan Qaboos University (Oman), 2 - Chemical Profile Control Leader (Oman) 09:40-10:00 (20min) 8:40 - 10:00 (1h20) T1 - Complex fluids II LIMA Chairman: J. Tichy › High Pressure Behavior of Oil Extracted from Green Alga Botryococcus braunii - Zhang Bo(1), Mawatari Toshifumi(1), Ohno Nobuyoshi(1), K. Tajima(1), Ozeki Mayumi(2), Kuno Hitoshi(2), Bunne Satoshi(2), Fukuda Hiroaki(2), Watanabe Makoto(3) 1 - Saga University (Japan), 2 - Denso corporation (Japan), 3 - University of Tsukuba (Japan) 08:40-09:00 (20min) › Proposal of a General Method to Investigate Long Term Interactions between Minor Components of Complex Lubricant Formulations - Fox Malcolm(1) 1 - University of Leeds (United Kingdom) 09:00-09:20 (20min) › The Static and Dynamic characteristics of an Offset Journal Bearing Lubricated with micropolar Fluid - Boualem Chetti(1) 1 - university of khemis miliana (Algeria) 09:20-09:40 (20min) › CANCELLED - Observation of lubrication behaviours by a liquid droplet - Guo Feng(1), Li X.M.(1) 1 - Qingdao Technological University (China) 09:40-10:00 (20min) Coffee break 10:00 - 10:20 (20min) Coffee break T5/6 - Chemical and structural activation in tribology II T1 - Challenges in lubricated systems T4 - Friction and Wear II 10:20 - 12:10 (1h50) T5/6 - Chemical and structural activation in tribology II CARACAS - BRASILIA Chairmen: R. Bennewitz and M. Moseler › The Surface Chemistry of Boundary Film Formation - Tysoe Wilfred T.(1) 1 - Department of Chemistry and Biochemistry (United States) 10:20-10:50 (30min) › Development of Multi-scale, Multi-physics Simulators for Tribochemical Applications - Miyamoto Akira(1), Hatakeyama Nozomu(1), Suzuki Ai(1), Miura Ryuji(1), Kozawa Sumio(1), Williams Mark(1) 1 - Tohoku University (Japan) 10:50-11:10 (20min) › Atomic-scale Processes in Adhesion and Wear Elucidated by In Situ TEM Tribological Studies and Atomistic Modeling - Carpick Robert(1), Jacobs T.D.B.(2), Ryan K.E.(3), Grierson D.S.(4), Lefever J.A.(2), Turner K.T.(1), Harrison J.A.(3) 1 - Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania (United States), 2 - Department of Materials Science and Engineering, University of Pennsylvania (United States), 3 - Department of Chemistry, United States Naval Academy (United States), 4 - systeMECH LLC (United States) 11:10-11:30 (20min) › Understanding the Mechanisms of Friction in Pure Metals, Alloys and Composites - Chandross Michael(1), Cheng Shengfeng(1) 1 - Sandia National Laboratories (United States) 11:30-11:50 (20min) › Numerical study of lubrication properties of dry granulates and suspensions - Bierwisch Claas(1), Moseler Michael(1) 1 - MikroTribologie Centrum (Germany) 11:50-12:10 (20min) 10:20 - 12:10 (1h50) T1 - Challenges in lubricated systems LIMA Chairman: G.E. Moralès-Espejel › A new concept in cavitation modelling - Almqvist Andreas(1), Wall P.(2) 1 - Division of Machine Elements, Luleå University of Technology (Sweden), 2 - Division of Mathematical Sciences, Luleå University of Technology (Sweden) 10:20-10:50 (30min) › New mass conserving cavitation algorithm originating from compressible fluid models - Bayada Guy(1) 1 - INSA Lyon (France) 10:50-11:10 (20min) › Experimental study of hydrodynamic spiral groove mechanical seals - Djamaï Andel(1), Brunetiere Noël(1) 1 - Institut Pprime (France) 11:10-11:30 (20min) › CANCELLED - An Ultrasonic Investigation of Lubrication on the Tool/Chip Interface - Abodena Abulaziz(1), Marshall M.B(1)., Dwyer-Joyce R.S.(1) 1 - University of Sheffield (United Kingdom) 11:30-11:50 (20min) › Measurement of Piston Ring Pack Lubricant Residence Time in a Gasoline Engine using Laser Induced Fluorescence - Notay Rai Singh(1), Priest Martin(1), Coy Richard(1), Fox Malcolm(1) 1 - iETSI, School of Mechanical Engineering, University of Leeds (United Kingdom) 11:50-12:10 (20min) 10:30 - 12:10 (1h40) T4 - Friction and Wear II MEXICO Chairman: P. Stempfle › Rubbing force estimation during blade/seal interaction - Mandard Romain(1)(2), Witz Jean-François(2), Desplanques Yannick(2), Mériaux Jean(1) 1 - SNECMA (France), 2 - Laboratoire de Mécanique de Lille (France) 10:30-10:50 (20min) › Wear and Friction Behaviour of PA12, PVDF, PEEK and PPS Polymer Tapes - Burke Oliver(1), Lewis Roger(1), Fernando Upul(2) 1 - The University of Sheffield (United Kingdom), 2 - Wellstream GE (United Kingdom) 10:50-11:10 (20min) › Friction modification of the wheel/rail contact - A comparison between full-scale and twin disc experimentation - Buckley-Johnstone Luke(1), Lewis Roger(1), Lewis Stephen(1), Hardwick Chris(1) 1 - The University of Sheffield (United Kingdom) 11:10-11:30 (20min) › CANCELLED - Microstructure based modeling of angular impact on a martensitic steel and a metal matrix composite - Laukkanen Anssi(1), Lindroos Matti(2), Apostol Marian(2), Kuokkala Veli-Tapani(2), östman Kauko(2), Holmberg Kenneth(1) 1 - VTT Technical Research Centre of Finland (Finland), 2 - Tampere University of Technology (Finland) 11:30-11:50 (20min) › Synergy between tribo-oxidation Mechanically Mixed Layer (MML) and strain rate response on governing the dry sliding wear behavior of Ti-6Al-4V against SS316L - Jayachandran Ashok Raj(1), Deb Anindya(1), Kailas Satish V.(1) 1 - Indian Institute of Science (India) 11:30-11:50 (20min) › Comparison of Adhesive Force of Additive's Layer on The Rubbed Surface Using Microscopic Methods - Kaleli Hakan(1), Berthier Yves(2), Ozkan Dogus(1), Yuksek Levent(1), Sfarghiu Ana-Maria(2) 1 - Yildiz Technical University (Turkey), 2 - Laboratoire de Mécanique des Contacts et des Structures (France) 11:50-12:10 (20min) Lunch 12:10 - 13:40 (1h30) Lunch T5/6 - Diamond-Like Carbon: Interactions with lubricant additives T1 - Friction and wear III T2 - Vibrations 13:40 - 15:00 (1h20) T5/6 - Diamond-Like Carbon: Interactions with lubricant additives CARACAS - BRASILIA Chairmen: R. Carpick and M.-I. De Barros Bouchet › The Effects of Si-Dopant on the DLC Coating Tribological Performance and Tribofilm Formation Lubricated by Organic Friction Modifier-Containing Engine Oil Formulations - Zhao Hongyuan(1), Lanigan Joe(1), Morina Ardian(1), Neville Anne(1), Durham John(2), Meunier Frederic(3) 1 - University of Leeds (United Kingdom), 2 - Lubrizol Limited (United Kingdom), 3 - Sulzer Sorevi (France) 13:40-14:00 (20min) › Comparing the benefits of a rapidly-formed tribofilm against less tribological active DLCs over time - Lanigan Joe(1), Zhao Honyuan(1), Neville Anne(1),Morina Ardian(1) 1 - University of Leeds (United Kingdom) 14:00-14:20 (20min) › Tribochemistry of the lubricant additives/WDLC system under Boundary Lubrication - Yang Liuquan(1), Neville Anne(1), Brown Alisdair(2), Ransom Paul(2), Morina Ardian(1) 1 - Institute of Engineering Thermofluids, Surfaces and Interfaces (iETSI) (United Kingdom), 2 - Afton Chemical Limited (United Kingdom) 14:20-14:40 (20min) › Friction and Wear Characteristic of DLC Coatings with Different Hydrogen content Lubricated with Several Mo-containing Compounds and Their Related Compounds - Masuko Masabumi(1), Ono Takuya(1), Suzuki Akihito(1), Ito Hirotaka(2) 1 - Tokyo Institute of Technology (Japan), 2 - Kobe Steel Ltd. (Japan) 14:40-15:00 (20min) 13:40 - 15:00 (1h20) T1 - Friction and wear III LIMA Chairman: A. Fatu › Numerical study of the initiation and propagation of fretting-fatigue cracks in a TA6V polycrystal - Nigro Claudio(1), Proudhon Henry(1) 1 - Centre des Matériaux (France) 13:40-14:00 (20min) › A 3D Linear Elastic Multigrid Model for Strongly Heterogeneous Materials - Boffy Hugo(1), Venner Kees(1) 1 - University of Twente (Netherlands) 14:00-14:20 (20min) › Analysis of the mechanical and chemical wear components by combining multi-asperity nanotribology and discrete numerical simulation - Stempfle Philippe(1), Dang Hoang Anh(1), Domatti Anne(1), Takadoum Jamal(1) 1 - Institut FEMTO-ST (France) 14:20-14:40 (20min) › Conjecture on limits of boundary lubrication - Wojciechowski Lukasz(1), Mathia Thomas G.(2) 1 - Poznan University of Technology (Poland), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 14:40-15:00 (20min) 13:40 - 15:00 (1h20) T2 - Vibrations MEXICO Chairman: G. Poll › Modeling Vibrations Due to Surface Roughness at Planar Sliding Contacts - Soom Andres(1), Patankar Harshal(1) 1 - Department of Mechanical and Aerospace Engineering (United States) 13:40-14:00 (20min) › An Experimental Study of the Frictionally Induced Vibrations on Rough Textile Fabrics - Sümer Bilsay(1), Sancakdar Kaan(2) 1 - Hacettepe University (Turkey), 2 - Hacettepe University (Turkey) 14:00-14:20 (20min) › Unidirectional wetting of anisotropic textured GaSb surfaces - Contraires Elise(1), Teisseire Jérémie(2), Guibert Matthieu(1), Barthel Etienne(2), Sondergard Elin(2) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - Surface du Verre et Interfaces (France) 14:20-14:40 (20min) › Reducing disc brake squeal by sawed-groove texturing - A combined approach of complex eigenvalue analysis and dynamic transient analysis - Wang Dongwei(1), Mo Jiliang(1), Chen Guangxiong(1), Huangjiang Ouyang(2), Zhu Minhao(1), Zhou Zhongrong(1) 1 - Tribology Research Institute, Southwest Jiaotong University (China), 2 - Department of Engineering, University of Liverpool (United Kingdom) 14:40-15:00 (20min) Refreshment 15:00 - 15:20 (20min) Refreshment T5/6 - Interfacial processes at small scales T3 - Thermal effects on lubricated contacts T4 - Surface Treatment and Coating 15:20 - 16:40 (1h20) T5/6 - Interfacial processes at small scales CARACAS - BRASILIA Chairmen: R. Crockett and K. Nakayama › Tribological Properties and Mechanism of Graphene by Computational Study - Zhang Qi(1)(2), Diao Dongfeng(3)(2), Bai Shandan(1), Higuchi Yuji(1), Ozawa Nobuki(1), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Graduate School of Engineering, Tohoku University (Japan), 2 - Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, School of Mechanical Engineering, Xi'an Jiaotong University (China), 3 - Nanosurface Science and Engineering Research Institute, College of Mechatronics and Control Engineering, Shenzhen University (China) 15:20-15:40 (20min) › Molecular Dynamics Study of Lubrication Phenomena of Nanoscale Liquid Bridge between Surfaces - Tokumasu Takashi(1), Meurisse Marie-Helene(2), Fillot Nicolas(2), Vergne Philippe(2) 1 - Institute of Fluid Science, Tohoku University (Japan), 2 - Laboratoire de Mécanique des Contacts et des Structures (France) 15:40-16:00 (20min) › Friction Phase Diagram of Frenkel-Kontorova Atomistic Model - Motohisa Hirano(1), Shin Ito(1) 1 - Department of Mechanical Engineering, Gifu University 16:00-16:20 (20min) › SEM Observation Study for Recognition of Wear Mechanism Using AE Technique - Hase Alan(1), Wada Masaki(2), Mishina Hiroshi(3) 1 - Saitama Institute of Technology (Japan), 2 - Polytechnic University (Japan), 3 - Chiba University (Japan) 16:20-16:40 (20min) 15:20 - 16:40 (1h20) T3 - Thermal effects on lubricated contacts LIMA Chairman: Y. Desplanques › Thermal modeling of a grease lubricated thrust ball bearing - Neurouth A.(1), Changenet Christophe(2), Ville Fabrice(1), Arnaudon A.(3) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - ECAM (France), 3 - NTN-SNR (France) 15:20-15:40 (20min) › A theoretical simulation of thermal EHL in impact motion - Wang Jing(1), Wang Na(1), Yang Peiran(1), Lubrecht Ton(2), Kaneta Motohiro(3) 1 - Qingdao Technological University (China), 2 - Laboratoire de Mécanique des Contacts et des Structures (France), 3 - Faculty of Mechanical Engineering (Czech Republic) 15:40-16:00 (20min) › Aircraft Landing Gear Slider Bearing Thermo-Elastohydrodynamic Concept Model - Heirendt Laurent(1), Liu Hugh(1), Wang Phillip(2) 1 - Institute for Aerospace Studies (Canada), 2 - Messier-Dowty Inc., Messier-Bugatti-Dowty, Safran Group (Canada) 16:00-16:20 (20min) › The Effects of Oil Supply Pressure and Groove Position on Temperature and Pressure Profile in Journal Bearing Lubrication - Ahmad Mohamad Ali(1), Kasolang Salmiah(1), Jumahat Aidah(1), Rob Dwyer-Joyce(2) 1 - Universiti Teknologi MARA (Malaysia), 2 - Department of Mechanical Engineering (United Kingdom) 16:20-16:40 (20min) 15:20 - 16:40 (1h20) T4 - Surface Treatment and Coating MEXICO Chairman: C. Héau › Gas nitriding process : an effect on steels rolling contact fatigue life and behavior? - Le Marion(1), Ville Fabrice(1), Kleber Xavier(2) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Matériaux, ingénierie et sciences (France) 15:20-15:40 (20min) › Tribological advantages of nitrocarburizing over carbonitriding: influence of the composition and architecture of the compound layer - Cardey Pierre-François(1), Fleurentin Alexandre(2) 1 - Centre Technique des Industries Mécaniques Saint Etienne (France), 2 - Centre Technique des Industries Mécaniques Senlis (France) 15:40-16:00 (20min) › A study of the normal impact fatigue and impact wear behavior of thick hard carbide coatings - Richard Waudby(1)(2), Suhonen Tomi(1), Varis Tommi(1), Holmberg Kenneth(1) 1 - VTT Technical Research Centre of Finland (Finland), 2 - The University of Sheffield (United Kingdom) 16:00-16:20 (20min) › Wear resistant multilayer nanocomposite WC1-x/C coating on Ti-6Al-4V titanium alloy - Kubiak Krzysztof(1), Pawlak Wojciech(2), Wendler Bogdan(2), Mathia Thomas G.(3) 1 - University of Liverpool, School of Engineering (United Kingdom), 2 - Technical University of Lodz, Institute of Materials Science and Engineering (Poland), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 16:20-16:40 (20min) Award ceremony and closure 16:40 - 17:10 (30min) Award ceremony and closure CARACAS - BRASILIA

Online user: 1

RSS Feed