Tribo-Lyon : 40th Leeds-Lyon symposium on Tribology & Tribochemistry Forum 2013

›10:00 (4h)

Registration + Lunch (11:30-13:30)

10:00 - 14:00 (4h)

Registration + Lunch (11:30-13:30)

›14:00 (40min)

Opening

› CARACAS - BRASILIA

14:00 - 14:40 (40min)

Opening

CARACAS - BRASILIA

›14:40 (45min)

Plenary conference
Chairman: J.-M. Martin

› CARACAS - BRASILIA

14:40 - 15:25 (45min)

Plenary conference

CARACAS - BRASILIA

Chairman: J.-M. Martin

› Tribochemistry and tribocorrosion; understanding the interface to design better engineering systems - Anne Neville, University of Leeds 14:40-15:25 (45min)

›15:25 (20min)

Refreshment

15:25 - 15:45 (20min)

Refreshment

›15:45 (1h20)

T5/6 - Chemical and structural activation in tribology I
Chairmen: J.-M. Martin and A. Miyamoto

› CARACAS - BRASILIA

15:45 - 17:05 (1h20)

T5/6 - Chemical and structural activation in tribology I

CARACAS - BRASILIA

Chairmen: J.-M. Martin and A. Miyamoto

› Position-Shift of Triboplasma Generation Observed by Temperature Measurement as the Origin of Tribochemical Reactions - Nakayama Keiji(1) 1 - Chiba Institute of Technology (Japan) 15:45-16:05 (20min)

› Atomistic simulation on the sliding of a rigid indenter over aluminum with crystalline defects - Bortoleto Eleir(1), Souza Roberto(1), Cuppari Marcio(2) 1 - Surface Phenomena Laboratory of Polytechnic School of the University of São Paulo (Brazil), 2 - Federal University of ABC (Brazil) 16:05-16:25 (20min)

› Effect of temperature on chemical activity of nascent steel surface - Mori Shigeyuki(1), Konno Tadaaki(1), Shimotomai Naoshi(2), Nanao Hidetaka(1), Takiwatari Koji(3), Hoshi Yasushi(1) 1 - Department of Chemistry and Bioengineering, Faculty of Engineering, Iwate University (Japan), 2 - Kyodoyushi Co. Ltd (Japan), 3 - Ichinoseki National College of Technology (Japan) 16:25-16:45 (20min)

› Tribochemical effects during running-in of metals and alloys - Dienwiebel Martin(1), Feser Tim(1), Stoyanov Pantcho(1) 1 - FhG-KIT Mikrotribologie Centrum (Germany) 16:45-17:05 (20min)

›15:45 (1h20)

T1 - Elastohydrodynamic lubrication
Chairman: A. Almqvist

› LIMA

15:45 - 17:05 (1h20)

T1 - Elastohydrodynamic lubrication

LIMA

Chairman: A. Almqvist

› Effect of Hertzian Contact Pressure on Shear Stress Distribution of EHL Oil Films - Mawatari Toshifumi(1), Nakajima Akira(1), Zhang Bo(1), Ohno Nobuyoshi(1), Kaneta Motohiro(2) 1 - Saga university (Japan), 2 - Brno University of Technology (Czech Republic) 15:45-16:05 (20min)

› Transient effects and associated time scales in thermal elasto-hydrodynamic line contacts - Raisin Jonathan(1), Fillot Nicolas(1), Dureisseix David(1), Vergne Philippe(1), Lacour Vincent(2) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Total Supply Marketing, Centre de Recherche de Solaize (France) 16:05-16:25 (20min)

› Reduced Finite Element Elastohydrodynamic Lubrication Model: Circular Contacts - Habchi Wassim(1) 1 - Lebanese American University, Department of Industrial and Mechanical Engineering (Lebanon) 16:25-16:45 (20min)

› Model order reduction on stationary and dynamical isothermal Newtonian EHD contacts - Maier Daniel(1), Hager Corinna(1), Hetzler Hartmut(2), Fillot Nicolas(3), Vergne Philippe(3), Dureisseix David(3), Seemann Wolfgang(2) 1 - Robert Bosch GmbH (Germany), 2 - Karlsruhe Institute of Technology (Germany), 3 - Laboratoire de Mécanique des Contacts et des Structures (France) 16:45-17:05 (20min)

›15:45 (1h20)

T2 - Biotribology I
Chairman: N. Spencer

› MEXICO

15:45 - 17:05 (1h20)

T2 - Biotribology I

MEXICO

Chairman: N. Spencer

› Influence of Surface Roughness on the Fretting-Corrosion Regimes and Characteristics of Cemented Femoral Stems - Michael Bryant(1), Farrar Richard(2), Freeman Robert(2), Brumitt Ken(2), Neville Anne(1) 1 - Institute of Engineering Thermofluids, Surfaces and Interfaces (United Kingdom), 2 - DePuy International (United Kingdom) 15:45-16:05 (20min)

› Influence of surface morphology on mechanical properties of polyethylene. Tribological consequences in a biomimetic environment - Popa Mihaela(1), Wang Na(1), Portinha Daniel(2), Rieu Jean-Paul(3), Sfarghiu Ana-Maria(1), Berthier Yves(1) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Ingénierie des Matériaux Polymères (France), 3 - Institut Lumière Matière (France) 16:05-16:25 (20min)

› Effect of mental sweating on fingertip friction - Mizuhara Kazuyuki(1), Washio Toshikatsu(2), Hatano Hiroyuki(3), Ozaki Shiyo(1) 1 - Tokyo Denki University (Japan), 2 - The National Institute of Advanced Industrial Science and Technology (Japan), 3 - Kits Corporation (Japan) 16:25-16:45 (20min)

› An Evaluation of the Needed Dimples Spacing and Roughness of Hip Joint Prosthesis Articulating Surfaces at Partially Regular Surface Texture - Pakhaliuk Volodymyr(1), Kalinin Mikhaylo(1), Poliakov Oleksandr(1), Pashkov Yevgen(1), Ivanov Yevgen(1) 1 - Sevastopol National Technical University (Ukraine) 16:45-17:05 (20min)

›17:05 (15min)

Refreshment

17:05 - 17:20 (15min)

Refreshment

›17:20 (1h)

T5/6 - Graphitic materials in tribology
Chairmen: F. Dassenoy and M. Dienwiebel

› CARACAS - BRASILIA

17:20 - 18:20 (1h)

T5/6 - Graphitic materials in tribology

CARACAS - BRASILIA

Chairmen: F. Dassenoy and M. Dienwiebel

› Nanofriction properties of graphite tribofilms: influence of the tip/sample interface - Minatchy Georges(1), Romana Laurence(1), Bilas Philippe(1), Nomede Nadiege Martyr(2), Thomas Philippe(1), Mansot Jean-Louis(3)(1) 1 - Groupe de Technologie des surfaces et Interfaces (Guadeloupe), 2 - Laboratoire d'analyse par réactions nucléaires (Belgium), 3 - Centre commun de caratérisation des matériaux des Antilles et de la Guyane (Guadeloupe) 17:20-17:40 (20min)

› Experimental and theoretical investigations of friction properties of graphite intercalated compounds. - Mansot Jean-Louis(1)(2), Delbé K.(3), Baranek P.(4), Thomas P.(2), Boucher F.(5), Vangelisti F.(6), Billaud D.(6) 1 - Centre commun de caractérisation des matériaux des Antilles et de la Guyane (Guadeloupe), 2 - Groupe de Technologie des surfaces et Interfaces (Guadeloupe), 3 - Laboratoire Génie de Production (France), 4 - EDF - R&D, Department MMC and MAI (France), 5 - Institut des matériaux Jean Rouxel (France), 6 - Institut Jean Lamour (France) 17:40-18:00 (20min)

› Exfoliation of Graphene from C60 monolayer - Miura Kouji(1), Ishikawa M.(1), Ichikawa M.(1), Sasaki N.(2) 1 - Aichi University of Education (Japan), 2 - Department of Materials and Life Science, Faculty of Science and Technology, Seikei University (Japan) 18:00-18:20 (20min)

›17:20 (1h)

T2 - Contact mechanics
Chairwoman: A. Fabre

› LIMA

17:20 - 18:20 (1h)

T2 - Contact mechanics

LIMA

Chairwoman: A. Fabre

› Influence of a single asperity on stresses during lubricated sliding contact on DLC-coated system - Pagnoux Geoffrey(1)(2)(3), Fouvry Siegfried(3), Peigney Michael(2), Delattre Benoit(1), Mermaz-Rollet Guillaume(1) 1 - PSA Peugeot-Citroen (France), 2 - Laboratoire Navier (France), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 17:20-17:40 (20min)

› Surface Star Defect Tolerance Assessment on finished Silicon Nitride balls in Rolling Contact - Awan Abdul Waheed(1), Hadfield Mark(1), Thomas Ben(1), Vieillard Charlotte(2), Cundill Robin 1 - Bournemouth University (United Kingdom), 2 - SKF (Netherlands) 17:40-18:00 (20min)

› Elastic contact between representative rough surfaces - Yastrebov Vladislav(1), Anciaux Guillaume(2), Cailletaud Georges(1), Molinari Jean-François(2) 1 - Centre des Matériaux, MINES ParisTech (France), 2 - Laboratoire de Simulation en Mécanique des Solides, EPFL (Switzerland) 18:00-18:20 (20min)

›17:20 (1h)

T2 - Friction and wear I
Chairman: M. Kaneta

› MEXICO

17:20 - 18:20 (1h)

T2 - Friction and wear I

MEXICO

Chairman: M. Kaneta

› Probing the micromechanics of a multi-contact interface at the onset of frictional sliding - Prevost Alexis(1), Scheibert Julien(2), Debrégeas Georges(1) 1 - Laboratoire Jean PERRIN (France), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 17:20-17:40 (20min)

› Wear Depth Evaluation During Erosion of X65 Carbon Steel Using RMS Values of Measured Acoustic Emission Signals - Ukpai Jonathan(1), Barker Richard(1), Neville Anne(1) 1 - Institue of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds (United Kingdom) 17:40-18:00 (20min)

› Sliding Friction by a Liquid Meniscus Bridge between Parallel Plates - Kentaro Tanaka(1), Iwamoto Katsumi(1) 1 - Tokyo University of Marine Science and Technology (Japan) 18:00-18:20 (20min)

›18:30 (1h30)

Poster party

18:30 - 20:00 (1h30)

Poster party

›18:30 (1h30)

Posters - Coatings & Surfaces

18:30 - 20:00 (1h30)

Posters - Coatings & Surfaces

› Analysis by Scratch Method of Coatings of AISI5115 and M31 Steels Coated with AlTiN and CrN Using PVD Method - Aytaç Ayhan(1), Malayoglu Ugur(2), Sert Hasan(3) 1 - Turkish Military Academy (Turkey), 2 - Dokuz Eylül University (Turkey), 3 - University of Turkish Aeronautical Association (Turkey) 18:30-20:00 (1h30)

› Development of a combined optical lever atomic force microscope with a quartz crystal microbalance - Inoue Daisuke(1), Machida Shingo(1), Ikada Yuka(1), Taniguchi Junko(1), Suzuki Masaru(1), Ishikawa Makoto(2), Miura Kouji(2) 1 - University of Electro-Communications (Japan), 2 - Aichi University of Education (Japan) 18:30-20:00 (1h30)

› Effects of Doping Elements on the Tribological Properties of DLC films - Fukuda Hirochika(1), Tsuboi Ryo(1), Sasaki Shinya(2)(1), Tamura Tetsuya(3), Katou Shinji(3) 1 - Department of Mechanical Engineering, Graduate School of Tokyo University of Science (Japan), 2 - Tokyo University of Science (Japan), 3 - KYB Corporation (Japan) 18:30-20:00 (1h30)

› Influence of Nitrogen on Friction Properties of CNx Coatings Based on First-Principles Molecular Dynamics and Tight-Binding Quantum Chemical Molecular Dynamics Methods - Sato Seiichiro(1), Bai Shandan(1), Higuchi Yugi(1), Ozawa Nobuki(1), Adachi Koshi(2), Martin Jean Michel(3), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Tohoku University (Japan), 2 - Department of Nanomechanics, Tohoku University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 18:30-20:00 (1h30)

› Mechanical Response of Coated Surfaces under Severe Contact Loading - Elwafi Ali(1), Al-Sadi Bader(1), Al-Rushdi Azan(1), Barton David C.(2) 1 - Faculty of engineering (Oman), 2 - School of Mechanical Engineering, University of Leeds (United Kingdom) 18:30-20:00 (1h30)

› Neutron reflectometry of adsorbed additive layers on (a-C) DLC - Simic Rok(1), Kalin Mitjan(1), Hirayama Tomoko(2) 1 - Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana (Slovenia), 2 - Department of Mechanical Engineering, Doshisha University (Japan) 18:30-20:00 (1h30)

› Structure and Properties of Titanium Doped Tungsten Bisulfide Thin Films Produced by Magnetron Co-Sputtering DC Technique - De La Roche Yepes Jhonattan(1), Gonzalez Carmona Juan Manuel(2), Restrepo Parra Elisabeth(1), Sequeda Osorio Federico(2) 1 - Laboratorio de Fisica del Plasma (Colombia), 2 - Laboratorio de recubrimientos duros y aplicaciones industriales (Colombia) 18:30-20:00 (1h30)

› The Effect of Si and W Dopants on the Mechanical and Tribological Properties of Diamond-Like Carbon - Austin Louise(1), Neville Anne(1), Liskiewicz Tomasz(1), Tietema Roel(2) 1 - University of Leeds (United Kingdom), 2 - Hauzer Techno Coating BV (Netherlands) 18:30-20:00 (1h30)

› Tribological and Electrical Contact Behavior of Metal/DLC Nanocomposite Coating on Brass Substrate - Hombo Ryoichi(1), Takeno Takanori(2), Fontaine Julien(3), Miki Hiroyuki(4), Kato Naoki(1), Nozu Takahiro(1), Inayoshi Naruhiko(1), Belin Michel(3), Takagi Toshiyuki(5) 1 - DENSO CORPORATION (Japan), 2 - Graduate School of Engineering, Tohoku University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 4 - Frontier research Institute for Interdisciplinary Science, Tohoku University (Japan), 5 - Institute of Fluid Science, Tohoku University (Japan) 18:30-20:00 (1h30)

› Tribological behaviour of ZrCN PVD and other DLC coatings for engine components - Igartua Amaya(1), Fernandez X.(1), Zabala Borja(1), Ruiz De Gopegui U.(1), Tribotte P.(2), Abramczuk M.(2), Malhaire J.-M.(2) 1 - IK4-Tekniker (Spain), 2 - Renault - Direction de la Recherche, des Etudes Avancées et des Matériaux (France) 18:30-20:00 (1h30)

› Tribological performance of Cr/CrN and Cr/CrN/CrAlN multilayer coatings deposited by r.f. magnetron sputtering - Beliardouh Nasser Eddine(1), Bouzid K.(1), Tlili B.(2), Nouveau Corinne(2) 1 - Laboratoire Ingénierie des surfaces (Algeria), 2 - Laboratoire Bourguignon des Matériaux et Procédés (France) 18:30-20:00 (1h30)

› Tribological properties of Ti(CN)x hard coating on titanium alloy by pulsed plasma electrolytic carbonitriding process - Qin Yongkun(1), Xiong Dangsheng(1), Li Jianliang(1) 1 - Nanjing University of Science and Technology (China) 18:30-20:00 (1h30)

›18:30 (1h30)

Posters - Fluid Lubrication

18:30 - 20:00 (1h30)

Posters - Fluid Lubrication

› CFD Investigation of hydrodynamic lubrication on textured surface - Effects of interaction between dimples - Oshima Yasutsugu(1), Sasaki Shinya(1), Tsuboi Ryo(1) 1 - Department of Mechanical Engineering Tokyo University of Science (Japan) 18:30-20:00 (1h30)

› Combined Experimental and Numerical Study of PTFE Faced Thrust Bearings Considering Effect of Creep on Bearing Performance - Rothwell Benjamin(1), Hewson Rob(1), Neville Anne(1), Morina Ardian(2), Barton David(1) 1 - University of Leeds (United Kingdom), 2 - Institute of Engineering Thermofluids, Surfaces and Interfaces (iETSI) (United Kingdom) 18:30-20:00 (1h30)

› Film thickness equations for line-contact thermal elastohydrodynamic lubrication under misaligned loads - Wang Zhijian(1), Chen Xiaoyang(1), Xuejin Shen(1) 1 - School of Mechanical Engineering and Automatic, Shanghai University (China) 18:30-20:00 (1h30)

› Finite Line Contacts EHL Analysis of Misaligned Logarithmically Profiled Roller - Park Tae-Jo(1) 1 - Gyeongsang National University (South Korea) 18:30-20:00 (1h30)

› High-tech anti-wear lubricant based on carbon nanotube/ionic liquid combination - Taaber Triinu(1)(2), Põhako-Esko Kaija(1)(2), Plaado Margo(1), Saal Kristjan(1), Lõhmus Rünno(1), Mäeorg Uno(2) 1 - University of Tartu, Institute of Physics and Estonian Nanotechnology Competence Center (Estonia), 2 - University of Tartu - Institute of Chemistry (Estonia) 18:30-20:00 (1h30)

› Lubricant Rheology Effect on Roughness Behavior in EHL Contacts - Sperka Petr(1), Krupka Ivan(1), Hartl Martin(1) 1 - Brno University of Technology (Czech Republic) 18:30-20:00 (1h30)

› Modeling of the edge effects for Main Bearings of a Multi-supporting Crankshaft of an Internal Combustion Engine: the Theory - Rozhdestvenskiy Juriy(1), Zadorozhnaya Elena(1), Khozeniuk Nadezhda(1), Mylnikov Alexander(1), Boyarshinova Alla(1) 1 - South Ural State University (National Research University) (Russia) 18:30-20:00 (1h30)

› Research on Causes of Cavitation Generation on Textured Surface under Hydrodynamic Lubrication - Tsuboi Ryo(1), Nakano Akira(1), Sasaki Shinya(1) 1 - Department of Mechanical Engineering Tokyo University of Science (Japan) 18:30-20:00 (1h30)

› Thermal Friction Analysis of a Single-Nut Preloaded Ball-Screw - Wei Chin-Chung(1), Horng Jeng-Haur(1) 1 - National Formosa University (Taiwan) 18:30-20:00 (1h30)

› Tribological properties of halogen-free ionic liquids against sintered ceramics - Kondo Yuriko(1), Kawada Shohei(1), Watanabe Seiya(1), Tsuboi Ryo(1), Sasaki Shinya(1) 1 - Tokyo University of Science (Japan) 18:30-20:00 (1h30)

›18:30 (1h30)

Posters - Lubricant Additives

18:30 - 20:00 (1h30)

Posters - Lubricant Additives

› 1,3-Diketone Fluids and their Complexes with Iron - Walter Michael(1)(2), Amann Tobias(2), Li Ke(3), Kailer Andreas(2), Rühe Jürgen(3), Moseler Michael(2) 1 - Freiburg Materials Research Center (Germany), 2 - IWM - Fraunhofer Institute for Mechanics of Materials (Germany), 3 - Department of Microsystems Engineering (Germany) 18:30-20:00 (1h30)

› Adsorption of fatty acids on steel and gold surfaces: An in-situ XPS study - Matta Christine(1), Loehlé Sophie(1), Minfray Clotilde(1), Le Mogne Thierry(1), Martin Jean-Michel(1), Iovine Raphaele(2), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - Tohoku University (Japan) 18:30-20:00 (1h30)

› Comparative study of tribological behaviour of steel/steel and steel/nanocristallin diamond contacts lubricated by organomolybdenum and ZnDTP - Gorbatchev Olga(1), Fedry Simon(1), De Barros Bouchet Maria-Isabel(1), Le Mogne Thierry(1), Iovine Raphaele(2), Martin Jean Michel(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France) 18:30-20:00 (1h30)

› Effect of Lubricant Chemistry on the Camshaft Friction and Follower Rotation - Mufti Riaz(1), Khurram Muhammad(1), Qureshi Farrukh(2), Zahid Rehan(1), Aslam Jawad(1) 1 - National University of Sciences and Technology, School of Mechanical and Manufacturing Engineering (Pakistan), 2 - The Lubrizol Corporation (United States) 18:30-20:00 (1h30)

› Effects of iron oxide layers on adsorption mechanism of C18 fatty acid: A computational study - Loehlé Sophie(1), Minfray Clotilde(1), Christine Matta(1), Le Mogne Thierry(1), Martin Jean Michel(1), Iovine Raphaele(2), Obara Yukiko(3), Miura Ryuji(3), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - NICHe (Japan) 18:30-20:00 (1h30)

› Experimental analysis of tribological properties of chemically modified bio-based lubricant with nanoparticle additives - Mohd Zulkifli Nurin Wahidah(1), Kalam Md Abul(1), Masjuki Haji Hassan(1), Yunus R.(2) 1 - University of Malaya (Malaysia), 2 - University Putra Malaysia (Malaysia) 18:30-20:00 (1h30)

› Impact Study of Fuel Additives in Piston Ring Cylinder Liner Contact - Forest Cyrielle(1), Matta Christine(1), De Barros Bouchet Maria-Isabel(1), Mazarin Michael(2), Le Mogne Thierry(1), Martin Jean Michel(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL Raffinage Marketing (France) 18:30-20:00 (1h30)

› Influence of the structural characteristics of IF-MoS2 nanoparticles on their lubrication mechanisms - Imène Lahouij, Lahouij Imène(1), Vacher Béatrice(1), Dassenoy Fabrice(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France)de Tribologie et Dynamique des Systèmes 18:30-20:00 (1h30)

› Microencapsulation for Next Generation Lubrication - Mitchell Karen(1), Neville Anne(2), Morina Ardian(1), Cayre Olivier(1), Sutton Mike(3), Walker Gary(3) 1 - University of Leeds (United Kingdom), 2 - Institue of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds (United Kingdom), 3 - Lubrizol Limited (United Kingdom) 18:30-20:00 (1h30)

› Optimized Nanolubricant for Friction Reduction - Abdullah Muhammad Ilman Hakimi Chua(1), Abdollah Mohd Fadzli Bin(1), Amiruddin Hilmi(1), Mat Nuri Nur Rashid(1) 1 - Center of Advanced Research on Energy, Universiti Teknikal Malaysia Melaka (Malaysia) 18:30-20:00 (1h30)

› Quantum Chemical Molecular Dynamics Simulations of Chemical Mechanical Polishing Processes for Silicon Wafer by SiO2 Abrasive Grain - Kawaguchi Kentaro(1), Yuji Higuchi(1), Nobuki Ozawa(1), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Tohoku University (Japan) 18:30-20:00 (1h30)

› Speed-Dependent Friction Characteristic of ZnDTP Having Linear Hydrocarbon Moiety - Aoki Saiko(1), Suzuki Akihito(1), Kubouchi Masatoshi(1), Masuko Masabumi(1) 1 - Tokyo Institute of Technology, Department of Chemical Engineering, Graduate School of Science and Engineering (Japan) 18:30-20:00 (1h30)

› Study of GMO concentration on the boundary lubricated W-doped DLC coatings - Yang Liuquan(1), Neville Anne(1), Brown Alisdair(2), Ransom Paul(2), Morina Ardian(1) 1 - Institute of Engineering Thermofluids, Surfaces and Interfaces (iETSI) (United Kingdom), 2 - Afton Chemical Limited (United Kingdom) 18:30-20:00 (1h30)

› The research on tribological behaviors of lubricating oil in TFL - Zhang Jie(1) 1 - Center of Lubricants Research and Development, Petrochina (China) 18:30-20:00 (1h30)

› Towards a better understanding of warm mix asphalt additives - Geisler Flavien(1)(2), Lapalu Laurence(2), Kapsa Philippe(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France) 18:30-20:00 (1h30)

› Tribological behaviour of fullerene-like MoS2 nanoparticles for different lubrication regimes in the presence of dispersants - Rabaso Pierre(1)(2)(3), Ville Fabrice(3), Dassenoy Fabrice(2), Martin Jean Michel(2), Diaby Moussa(1) 1 - PSA Peugeot - Citroën (France), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 3 - Laboratoire de Mécanique des Contacts et des Structures (France) 18:30-20:00 (1h30)

›18:30 (1h30)

Posters - Materials for Tribology

18:30 - 20:00 (1h30)

Posters - Materials for Tribology

› A micromechanical approach for the wear prediction of fiber-reinforced composites - Yang Dan(1), Gu Shui-Tao(1), He Qi-Chang(2) 1 - School of Mechanical Engineering, Tribology Research Institute, Southwest Jiaotong University (China), 2 - Université Paris-Est, Laboratoire Modélisation et Simulation Multi Echelle (France) 18:30-20:00 (1h30)

› Alloying process for Cu-Zn mixed powder using the tribo-mechanical approach - Miki Hiroyuki(1), Sakuma Tomoya(2), Nakayama Noboru(3), Miyazaki Takamichi(4), Takeishi Hiroyuku(2) 1 - Frontier research Institute for Interdisciplinary Science, Tohoku University (Japan), 2 - Science and Mechanical Department, Chiba Institute of Technology (Japan), 3 - Mechanical Systems Engineering Department, Shinshu University (Japan), 4 - Technical Division, School of Engineering, Tohoku University (Japan) 18:30-20:00 (1h30)

› An Experimental Study of the Impact Erosion for high Pressure pipe Manifold - Fan Jianchun(1), Zhang Jixin(1), Zhang Laibin(1), Xie Yongjin(2), Wu Hanchun(2) 1 - China University of Petroleum (China), 2 - SJ Petroleum Machinery Corporation (China) 18:30-20:00 (1h30)

› Biomimetic Sealing System for Power Generation from Natural Energy - Nakanishi Yoshitaka(1), Shimazu Kenryo(1), Mine Syouji(1), Oka Yuichi(1), Matsumoto Yasuaki(1), Higaki Hidehiko(2) 1 - Kumamoto University (Japan), 2 - Kyushu Sangyo University (Japan) 18:30-20:00 (1h30)

› CANCELLED - Wear Measurement and Analysis of Explanted Acetabular Cups - Uddin Mohammad(1) 1 - School of Engineering, University of South Australia (Australia) 18:30-20:00 (1h30)

› Comparative Tribological study of biomaterials AISI 316L and Ti6Al7Nb - Fellah Mamoun(1), Labaïz Mohamed(1), Assala Omar(1), Iost Alain(2) 1 - Surface Engineering and Tribology Team, Laboratory of Metallurgy and Engineering Materials (Algeria), 2 - Laboratoire de Mécanique de Lille (France) 18:30-20:00 (1h30)

› Correlations between wear mechanisms and rail grinding operations. - Cuervo P. A.(1), Santa J.F.(2)(1), Toro A(1) 1 - Universidad Nacional de Colombia (Colombia), 2 - Instituto Tecnológico Metropolitano (Colombia) 18:30-20:00 (1h30)

› Development of a novel component test to investigate railway switch slide baseplate tribology - Beagles Adam(1), Lewis Roger(1), Fletcher David(1) 1 - The University of Sheffield (United Kingdom) 18:30-20:00 (1h30)

› Effect of heat dissipaters in a NA disc brake pad - Wear performance and influence on µ sensitivity towards pressure and speed - Thiyagarajan V.(1), Kalaichelvan K.(1) 1 - Department of Production Technology, Madras Institute of Technology (India) 18:30-20:00 (1h30)

› Effect of Temperature on the Tribological Properties of the Polyimide Composites Reinforced with Different Fibres in Sliding and Erosive Conditions - Zhao Gai(1), Antonov Maksim(1), Hussainova Irina(1), Wang Qihua(2), Wang Tingmei(2) 1 - Tallinn University of Technology (Estonia), 2 - State Key Laboratory of Solid Lubrication (China) 18:30-20:00 (1h30)

› Field measurement of coefficient of friction in rails using a hand-pushed tribometer - Areiza Yuliana(1), Santa J.F.(1)(2), Toro A.(1), Garcés S.i(1), Vargas G.(1) 1 - Universidad Nacional de Colombia (Colombia), 2 - Instituto Tecnológico Metropolitano (Colombia) 18:30-20:00 (1h30)

› Mechanical Characteristic Analysis of Micro-gear Meshing Transmission - Zhenlu Wang(1), Xuejin Shen(1), Xiaoyang Wang(1), Yi Hu(1) 1 - Shanghai University (China) 18:30-20:00 (1h30)

› Micro-contact parameters and specific dissipated friction power during self-mating reciprocating sliding wear tests of a martensitic steel - Stickel Daniel(1), Fischer Alfons(1) 1 - University of Duisburg-Essen (Germany) 18:30-20:00 (1h30)

› Modeling of the abrasive tool wear in metal cutting: Influence of the sliding-sticking contact zones - Halila Faycel(1)(2), Nouari Mohammed(1)(2), Czarnota Christophe(3) 1 - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée (France), 2 - École Nationale Supérieure des Mines d'Albi-Carmaux (France), 3 - Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (France) 18:30-20:00 (1h30)

› Prevent/Limit Edge Loading in Total hip Replacement - Torabi Kachousangi Ehsanollah(1), Asadirad Reyhaneh(1), Mao Ken(1) 1 - The University of Warwick - School of Engineering (United Kingdom) 18:30-20:00 (1h30)

› Study of nitrided steel R6M5 abrasive wear-resistance - Rakhadilov Bauyrzhan(1), Skakov Mazhyn(1), Shceffler Michael(2) 1 - D. Serikbayev East Kazakhstan state technical university (Kazakhstan), 2 - Otto-von-Guericke University Magdeburg (Germany) 18:30-20:00 (1h30)

› Synergy between tribo-oxidation Mechanically Mixed Layer (MML) and strain rate response on governing the dry sliding wear behavior of Ti-6Al-4V against SS316L - Jayachandran Ashok Raj(1), Deb Anindya(1), Kailas Satish V.(1) 1 - Indian Institute of Science (India) 18:30-20:00 (1h30)

› The development of friction tester in pressurized hot water at 30 MPa and 300 degree C - Yagi Yuji(1), Tokoroyama Takayuki(1), Umehara Noritsugu(1), Inayoshi Naruhiko(2), Sasaki Keiji(2) 1 - Department of Mechanical Science and Engineering (Japan), 2 - DENSO CORPORATION (Japan) 18:30-20:00 (1h30)

› The Running-in Behavior of AlSi as a function of Si morphology and final machining - Linsler Dominic(1), Scherge Matthias(1) 1 - MikroTribologie Centrum (Germany) 18:30-20:00 (1h30)

› Wear phenomena and simulation of hot shearing process - Varga Markus(1), Torres H.(1), Horwatitsch D.(2), Merstallinger A.(3), Adam K.(3), Badisch E.(1) 1 - AC2T research GmbH (Austria), 2 - LKR Leichtmetallkompetenzzentrum Ranshofen GmbH (Austria), 3 - Aerospace & Advanced Composites GmbH (Austria) 18:30-20:00 (1h30)

›18:30 (1h30)

Posters - Surface Engineering

18:30 - 20:00 (1h30)

Posters - Surface Engineering

› A benchmark of filtering methods for tribological surfaces - Le Goic Gaetan(1), Bigerelle Maxence(2), Favrelière Hugues(1), Samper Serge(1) 1 - Laboratoire SYstèmes et Matériaux pour la MEcatronique (France), 2 - Thermique, Ecoulement mécanique, Matériaux, Mise en forme, PrOduction (France) 18:30-20:00 (1h30)

› Application of Surface Modification for Airplanes Winglets - Ibrahim Zaharah(1), Osman M.shahril(1), Khan Amir Azam(1), Ibrahim M. Danial(1), Miyanaga Norifumi(2) 1 - Universiti Malaysia Sarawak (Malaysia), 2 - Waseda University (Japan) 18:30-20:00 (1h30)

› Consideration of combined water intrusion/drainage effects in the prediction of road skid resistance - Do Minh-Tan(1), Prevost Delphine(2), Cerezo Veronique(1), Chabanon Christian(2) 1 - IFSTTAR (France), 2 - RENAULT (France) 18:30-20:00 (1h30)

› Decomposition of a tribological system by chaos theory - Bigerelle Maxence(1), Nianga Jean Marie(2), Iost Alain(2) 1 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France), 2 - Laboratoire de Mécanique de Lille (France) 18:30-20:00 (1h30)

› Friction and material transfer of a textured wafer surface during sliding - Xiao H.(1), Wang K.(2), Belin Michel(3), Fontaine Julien(3), Liang Hong(1) 1 - Mechanical Engineering (United States), 2 - Materials Science and Engineering, Texas A&M University (United States), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 18:30-20:00 (1h30)

› In-situ observation of the friction/water depth relationship - Cerezo Veronique(1), Bouteldja Mohamed(2), Prevost Delphine(3), Do Minh-Tan(1) 1 - IFSTTAR (France), 2 - Département Laboratoire de Lyon (France), 3 - RENAULT (France) 18:30-20:00 (1h30)

› Laboratory test to evaluate the effect of contaminants on road skid resistance - Do Minh-Tan(1), Cerezo Veronique(1), Zahouani Hassan(2) 1 - IFSTTAR (France), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 18:30-20:00 (1h30)

› Microstructure and wear resistance changes of 30CrMnSiA steel modified surface layers by electrolyte-plasma processing - Skakov Mazhyn(1), Zhurerova Laila(1), Scheffler Michael(2) 1 - D. Serikbaev East Kazakhstan State Technical University (Kazakhstan), 2 - Institute of Materials and Joining Technology of Otto von Guericke University (Germany) 18:30-20:00 (1h30)

› Numerical Modeling for Cold Sprayed Particle Deposition - Xie Jing(1), Nelias Daniel(1), Walter-Le Berre Hélène(1), Ito Kiyohiro(2), Ichikawa Yuji(2), Ogawa Kazuhiro(2) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Tohoku University (Japan) 18:30-20:00 (1h30)

› Relationship between brightness and roughness of polypropylene abraded surfaces - Najjar Denis(1), Van Gorp Adrien(2), Bigerelle Maxence(3) 1 - Ecole Centrale de Lille (France), 2 - Centre Arts et Métiers ParisTech de Lille (France), 3 - Université de Valenciennes et du Hainaut Cambrésis (France) 18:30-20:00 (1h30)

› Roughness and Wetting, a Multiscale Approach - Belaud Vanessa(1), Bigerelle Maxence(2)(3), Valette Stephane(1), Stremsdoerfer Guy(1), Benayoun Stephane(1) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - Laboratoire de Thermique, des Ecoulements, de Mécanique et Matériaux en Mise en Forme et Production (France), 3 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France) 18:30-20:00 (1h30)

› Running-in process of Si-SiOx/SiO2 pair at nanoscale - Qian Linmao(1), Chen Lei(1), Kim Seong H.(2), Wang Xiaodong(1) 1 - Tribology Research Institute, National Traction Power Laboratory, Southwest Jiaotong University (China), 2 - Department of Chemical Engineering, The Pennsylvania State University (United States) 18:30-20:00 (1h30)

› Scuffing of spiral bevel gears - Kalbarczyk Marek(1), Tuszynski Waldemar(1), Szczerek Marian(1), Michalczewski Remigiusz(1) 1 - ITeE-PIB (Poland) 18:30-20:00 (1h30)

› The Representative Topography of Worn Hot Rolling Mill Cylinders - Luc Emilie(1), Bigerelle Maxence(2), Deltombe Raphaël(2) 1 - APERAM Stainless Services and Solutions (France), 2 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France) 18:30-20:00 (1h30)

› Topographical and ellipsometrical analysis of orange peel on polished steel surfaces - Miranda-Medina Maria(1), Somkuti Peter(1), Jech Martin(1), Vernes András(2) 1 - Austrian Center of Competence for Tribology (Austria), 2 - Institute of Applied Physics, Vienna University of Technology (Austria) 18:30-20:00 (1h30)

› Topographical Model Selection in Tribology - Tchoundjeu Stéphane(1)(2), Bigerelle Maxence(3), Robbe-Valloire François(2), Da Silva T.(2), Jarnias Frédéric(1) 1 - Total Supply Marketing (France), 2 - Laboratoire d'Ingénierie des Systèmes Mécaniques et des MAtériaux (France), 3 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France) 18:30-20:00 (1h30)

› Tribological Performance of PTFE + Taillings of Scheelite Composites - Juliana Souza Juliana(1), De Sá Leitão N. C. M. C.(1), De Azevedo M. S. P.(1), De Azevedo L. S. P.(1), Oliveira P. M.(1), De Medeiros J. T. N.(1), Matamoros E. P.(1) 1 - Federal University of Rio Grande do Norte (Brazil), Federal University of Rio Grande do Norte 18:30-20:00 (1h30)

› Wear Behavior of Magnesium Alloys AZ31B and its Composites - Nguyen Q.B.(1), Lim C.Y.h(1) 1 - Department of Mechanical Engineering, National University of Singapore (Singapore) 18:30-20:00 (1h30)