Tribo-Lyon : 40th Leeds-Lyon symposium on Tribology & Tribochemistry Forum 2013

›8:30 (45min)

Plenary conference
Chairman: P. Vergne

› CARACAS - BRASILIA

8:30 - 9:15 (45min)

Plenary conference

CARACAS - BRASILIA

Chairman: P. Vergne

› Towards an atomic scale understanding of wear in carbon materials and metals - Michael Moseler, MikroTribologie Centrum 08:30-09:15 (45min)

›9:15 (20min)

Break

9:15 - 9:35 (20min)

Break

›9:35 (1h20)

T5/6 - Diamond-Like Carbon: Solid and boundary lubrication
Chairmen: M. Kubo and J.-L. Mansot

› CARACAS - BRASILIA

9:35 - 10:55 (1h20)

T5/6 - Diamond-Like Carbon: Solid and boundary lubrication

CARACAS - BRASILIA

Chairmen: M. Kubo and J.-L. Mansot

› First-Principles Calculation on the Structure Transition of Diamond to Graphene in Si-Doped DLC - Bai Shandan(1), Zhang Qi(2)(1), Kobayashi Yoshihiko(1), Sato Seiichiro(1), Higuchi Yuji(1), Ozawa Nobuki(1), Adachi Koshi(3), Martin Jean Michel(4), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Graduate School of Engineering, Tohoku University (Japan), 2 - Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, School of Mechanical Engineering, Xi'an Jiaotong University (China), 3 - Department of Nanomechanics, Graduate School of Engineering, Tohoku University (Japan), 4 - Laboratoire de Tribologie et Dynamique des Systemes, Ecole Centrale de Lyon (France) 09:35-09:55 (20min)

› Investigating the Tribochemistry of Silicon Oxide-Doped Diamond-Like Carbon: from Ultra-High Vacuum Systems to the International Space Station - Mangolini Filippo(1), Krick Brandon(2), Sawyer W. Gregory(2), Scharf Thomas(3), Ohlhausen James(4), Prasad Somuri(4), Hilbert James(5), Fontaine Julien(6), Carpick Robert(5) 1 - Department of Materials Science and Engineering, University of Pennsylvania (United States), 2 - Department of Mechanical and Aerospace Engineering, University of Florida (United States), 3 - Department of Materials Science and Engineering, University of North Texas (United States), 4 - Sandia National Laboratories (United States), 5 - Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania (United States), 6 - Laboratoire de Tribologie et Dynamique des Systèmes, Ecole Centrale de Lyon (France) 09:55-10:15 (20min)

› Formation process of metal-rich tribo-film on the counter face during sliding against metal/diamondlike-carbon nanocomposite coatings - Minoru Goto(1), Ito Kosuke(2), Fontaine Julien(3), Takeno Takanori(4), Miki Hiroyuki(5) 1 - Ube National College of Technology (Japan), 2 - College of Engineering, Nihon University (Japan), 3 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 4 - Graduate School of Engineering, Tohoku University (Japan), 5 - Center for Interdisciplinary Research, Tohoku University (Japan) 10:15-10:35 (20min)

› The Origin of the Tribofilm Formed in DLC/MAC Lubrication Using 13C-DLC - Iwaki Masanori(1), Takeno Takanori(2), Miki Hiroyuki, Takagi Toshiyuki(3) 1 - Japan Aerospace Exploration Agency (Japan), 2 - Graduate School of Engineering, Tohoku University (Japan), 3 - Institute of Fluid Science, Tohoku University (Japan) 10:35-10:55 (20min)

›9:35 (1h20)

T1 - Biotribology II
Chairwoman: A. Neville

› LIMA

9:35 - 10:55 (1h20)

T1 - Biotribology II

LIMA

Chairwoman: A. Neville

› Friction of 316L Stainless Steel on Soft-tissue-like Poly (vinyl alcohol) Hydrogel in Physiological Liquid - Kosukegawa Hiroyuki(1), Fridrici Vincent(2), Laurenceau Emmanuelle(2), Kapsa Philippe(3), Ohta Makoto(1) 1 - Tohoku University (Japan), 2 - Ecole Centrale de Lyon (France), 3 - Ecole Centrale de Lyon (France) 09:35-09:55 (20min)

› Tribological study of oral care silica - Descartes Sylvie(1), Courtieux Laure(2), Peditto Francesca(3) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Département Génie Mécanique et Développement (France), 3 - Solvay Silica (France) 09:55-10:15 (20min)

› CANCELLED - Comparison of Sliders for Tactile Friction Measurements - Henson Brian(1), Cervera Guillaume(2), Feng Zhichao(3) 1 - School of Mechanical Engineering, University of Leeds (United Kingdom), 2 - Département Génie Mécanique Développement, INSA de Lyon (France), 3 - The University of Hong Kong (Hong Kong SAR China) 10:15-10:35 (20min)

›9:35 (1h20)

T2 - Surface texturing I
Chairman: M. Priest

› MEXICO

9:35 - 10:55 (1h20)

T2 - Surface texturing I

MEXICO

Chairman: M. Priest

› Relation between roughness and surface hardening after ultrasonic shot peening - Marteau Julie(1), Bigerelle Maxence(2) 1 - Laboratoire Roberval (France), 2 - Laboratoire d'automatique et de mécanique industrielles et humaines (France) 09:35-09:55 (20min)

› Surface Characterization of Ultrasonic Shot Peening Surface - Marteau Julie(1), Bigerelle Maxence(2), Mazeran Pierre-Emmanuel(1) 1 - Laboratoire Roberval (France), 2 - Laboratoire d'automatique et de mécanique industrielles et humaines (France) 09:55-10:15 (20min)

› Quantitative approach to determine the mechanical properties of sandblasted materials by nanoindentation - Xia Yang(1), Bigerelle Maxence(2), Bouvier Salima(1), Iost Alain(3) 1 - Laboratoire Roberval (France), 2 - Laboratoire d'automatique et de mécanique industrielles et humaines (France), 3 - Laboratoire de Mécanique de Lille (France) 10:15-10:35 (20min)

› CANCELLED - Influence of machining-induced 3D surface roughness on component's performance - Zeng Quanren(1)(2), Liu Geng(1), Liu Lan(1), Qin Yi(2) 1 - Northwestern Polytechnical University (China), 2 - University of Strathclyde (United Kingdom) 10:35-10:55 (20min)

›10:55 (15min)

Coffee break

10:55 - 11:10 (15min)

Coffee break

›11:10 (1h20)

T5/6 - Organic films and additives
Chairmen: S. Mori and M.C. Righi

› CARACAS - BRASILIA

11:10 - 12:30 (1h20)

T5/6 - Organic films and additives

CARACAS - BRASILIA

Chairmen: S. Mori and M.C. Righi

› Oil-Compatible Polymer-Brush Coatings for Lubrication - Bielecki Robert(1), Espinosa-Marzal Rosa(1), Spencer Nicholas(1) 1 - ETH Zurich, Department of Materials, Laboratory for Surface Science and Technology (Switzerland) 11:10-11:30 (20min)

› Ab initio adsorption of organic additives on an iron surface - Bedolla Velazquez P.(1), Eder S.(2), Dörr N.(2), Vernes Andras(2)(1) 1 - Institute of Applied Physics, Vienna University of Technology (Austria), 2 - Austrian Center of Competence for Tribology (Austria) 11:30-11:50 (20min)

› In-situ observation of additive concentration and molecular interaction in EHL contact using micro-FTIR - Koji Takiwatari(1), Hoshi Yasushi(2), Nanao Hidetaka(2), Mori Shigeyuki(2) 1 - Department of Chemical Engineering, Ichinoseki National Collage of Technology (Japan), 2 - Department of Chemistry and Bioengineering, Faculty of Engineering, Iwate University (Japan) 11:50-12:10 (20min)

› Coupling experimental and numerical approaches to study adsorption mechanism of stearic acid on iron based surfaces - Minfray Clotilde(1), Loehlé Sophie(1), Matta Christine(1), Le Mogne Thierry(1), Martin Jean Michel(1), Iovine Raphaele(2), Obara Yukiko(3), Miura Ryuji(3), Miyamoto Akira(3) 1 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 2 - TOTAL (France), 3 - Tohoku University (Japan) 12:10-12:30 (20min)

›11:10 (1h20)

T3 - Thermal effects on special materials in tribology
Chairman: F. Kennedy

› LIMA

11:10 - 12:30 (1h20)

T3 - Thermal effects on special materials in tribology

LIMA

Chairman: F. Kennedy

› Experimental Validation of a Thermal Model of a LOx Flooded Ball Bearing - Servais Christophe (1), Bozet Jean-Luc(1) 1 - Université de Liège (Belgium) 11:10-11:30 (20min)

› Tribological Conditions leading to the Ignition of an Energetic Material - Charlery Rudy(1), Saulot Aurelien(1), Daly Nicolas(2), Berthier Yves(1) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - HERAKLES, Groupe SAFRAN (France) 11:30-11:50 (20min)

› Selective choice of high temperature wear resistant materials - Varga Markus(1), Zikin A.(1), Hornung J.(2), Kirchgassner M.(2), Adam K.(3), Badisch E.(1) 1 - AC2T research GmbH (Austria), 2 - Castolin GmbH, IZ-NOE SUED (Austria), 3 - Voestalpine Stahl GmbH (Austria) 11:50-12:10 (20min)

› The Thermal Properties of Polyaryletherketones (PAEKs) and their Influence on Tribological Performance - Dyson Christopher(1)(2), Fox Malcolm(1), Hopkins Bill(3), Priest Martin(1) 1 - iETSI, School of Mechanical Engineering, University of Leeds (United Kingdom), 2 - ROCOL Lubricants (United Kingdom), 3 - ROCOL Lubricants (United Kingdom) 12:10-12:30 (20min)

›11:10 (1h20)

T2 - Surface texturing II
Chairman: E. Ciulli

› MEXICO

11:10 - 12:30 (1h20)

T2 - Surface texturing II

MEXICO

Chairman: E. Ciulli

› Tribological behaviors of textured surfaces under lubricated point contact conditions - Pawlus Pawel(1), Dzierwa Andrzej(1), Koszela Waldemar(1), Mathia Thomas G.(2) 1 - Rzeszow University of Technology (Poland), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France) 11:10-11:30 (20min)

› Identification of lubrication regime on textured surfaces by multi-scale decomposition - Hubert Cedric(1), Kubiak K. J.(2), Bigerelle Maxence(1), Dubois A.(1), Dubar L.(1) 1 - Thermique, Ecoulement mécanique, Matériaux, Mise en forme, PrOduction (France), 2 - University of Liverpool, School of Engineering (United Kingdom) 11:30-11:50 (20min)

› Tribological Properties of PTFE / Laser Surface textured Stainless Steel under Lubrication - Xiong Dangsheng(1), Qin Y.k.(1), Li J.l.(1), Wang Y.(1) 1 - Nanjing University of Science and Technology (China) 11:50-12:10 (20min)

› Tribological comparison of three typical wrinkled surface on the elastomeric polymer - Xiaoli Zhao(1), Weiwei An(2), Dezhi Zheng(1), Le Gu(1), Liqin Wang(1) 1 - Harbin Institute of Technology (China), 2 - Northeast Forestry University (China) 12:10-12:30 (20min)

›12:30 (1h30)

Lunch (group picture at 13:30)

12:30 - 14:00 (1h30)

Lunch (group picture at 13:30)

›14:00 (1h50)

T5/6 - Tribochemistry of sulfur and phosphorous compounds
Chairmen: M. Kalin and E. Tysoe

› CARACAS - BRASILIA

14:00 - 15:50 (1h50)

T5/6 - Tribochemistry of sulfur and phosphorous compounds

CARACAS - BRASILIA

Chairmen: M. Kalin and E. Tysoe

› Ab initio investigation of atomistic mechanisms in solid and boundary lubrication - Righi Maria Clelia(1), Zilibotti G.(1), Corni S(1), De Barros-Bouchet Maria-Isabel(2), Philippon David(2), Mambingo-Doumbe Samuel(2)(3), Le Mogne Thierry(2), Martin Jean-Michel(2), Bouffet A.(3) 1 - CNR Institute of Nanoscience (Italy), 2 - Laboratoire de Tribologie et Dynamique des Systèmes (France), 3 - TOTAL, Centre de Recherche de Solaize (France) 14:00-14:30 (30min)

› Wear and sulphur chemistry of the tribolayer - Jech Martin(1), Lenauer Claudia(1), Salopek Sara(1), Tomastik Christian(1), Wopelka Thomas(1) 1 - AC²T research GmbH (Austria) 14:30-14:50 (20min)

› Tribochemical mechanism of superlubricity of phosphoric acid: a reactive molecular dynamics study - Yue Dachuan(1), Ma Tianbao(1) 1 - State Key Laboratory of Tribology, Tsinghua University (China) 14:50-15:10 (20min)

› Tribological performance of DLC/cast iron and steel/cast iron system when lubricated in fully formulated oils with different concentration of MoDTC-type friction modifier. - Kosarieh Shahriar(1), Morina Ardian(1), Neville Anne(1), Flemming Jonathan(2), Laine Emmanuel(2) 1 - University of Leeds (United Kingdom), 2 - Infineum UK Limited (United Kingdom) 15:10-15:30 (20min)

› Real time MoS2 formation and friction performance - Rai Yugal(1), Morina Ardian(1), Neville Anne(1) 1 - University of Leeds (United Kingdom) 15:30-15:50 (20min)

›14:00 (1h50)

T4 - TTS and Material evolution
Chairman: F. Lebon

› MEXICO

14:00 - 15:50 (1h50)

T4 - TTS and Material evolution

MEXICO

Chairman: F. Lebon

› A thermo-mechanical model for TSTs based on TRIP, and numerical treatment - Lebon Frederic(1), Antoni Grégory(1), Désoyer Thierry(1) 1 - Laboratoire de Mécanique et d'Acoustique (France) 14:00-14:30 (30min)

› Role of white etching layer on rail squat formation - Simon Samuel(1)(2), Saulot Aurélien(1), Quost Xavier(2), Berthier Yves(1) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - RATP (France) 14:30-14:50 (20min)

› CANCELLED - Study of modified layers on 316L steel created by friction stir process - Langlade Cécile(1), Roman Adriana(1), Schlegel Daniel(2)(3), Gete Eric(1), Folea Milena(4) 1 - IRTES - LERMPS (France), 2 - IRTES - M3M (France), 3 - Ecole Supérieure des Technologies et des Affaires (France), 4 - Université Transilvania de Brasov (Roumania) 14:50-15:10 (20min)

› Understanding White Etching Cracks (WEC) in rolling element bearings: the effect of hydrogen charging - Ruellan Arnaud(1)(2)(3), Ville Fabrice(1), Kleber Xavier(2), Arnaudon Aurélien(3), Liatard Bernard(3) 1 - Laboratoire de Mécanique des Contacts et des Structures (France), 2 - Matériaux, ingénierie et sciences (France), 3 - NTN-SNR, R&D center (France) 15:10-15:30 (20min)

› Subsurface Deformation and Structural Changes during Scuffing of Steel - Li H.(1), Yagi K.(2), Sugimura J.(2), Kajita S.(3), Shinyoshi T.(4) 1 - Department of Hydrogen Energy Systems, Faculty of Engineering, Kyushu University (Japan), 2 - Department of Mechanical Engineering, Graduate School of Engineering, Kyushu University (Japan), 3 - Toyota Central R&D Labs., Inc (Japan), 4 - Toyota Motor Corporation (Japan) 15:30-15:50 (20min)

›14:10 (1h40)

T1 - Complex fluids I
Chairman: M. Fox

› LIMA

14:10 - 15:50 (1h40)

T1 - Complex fluids I

LIMA

Chairman: M. Fox

› Ice Lubrication for Transporting Heavy Stones to the Forbidden City in 15th - 16th Century China - Li Jiang(1), Chen Haosheng(2), Stone Howard(3) 1 - University of Science and Technology Beijing (China), 2 - Tsinghua University (China), 3 - Princeton University (United States) 14:10-14:30 (20min)

› How does the water mixed with Ionic Liquids behave under lubricating condition? - Watanabe Seiya(1), Nakano M(2)., Miyake K(2)., Tsuboi R(1)., Sasaki S(1). 1 - Department of Mechanical Engineering, Tokyo University of Science (Japan), 2 - National Institute of Advanced Industrial Science and Technology (AIST) (Japan) 14:30-14:50 (20min)

› CANCELLED - Halogen-Free Ionic Liquids Composed of Bis(salicylato)borate Anion as Lubricants Additive - Gusain Rashi(1), Singh R(1)., Shivkumar L(1)., Saran S(1)., Gupta P(1)., Khatri Om(1) 1 - CSIR-Indian Institute of Petroleum, Dehradun (India) 14:50-15:10 (20min)

› Study on Ionic Liquids in the Electric Field - Kawada Shouhei(1), Watanabe Seiya(1), Kondo Yuriko(1), Tsuboi Ryo(1), Sasaki Shinya(1) 1 - Department of Mechanical Engineering, Tokyo University of Science (Japan) 15:10-15:30 (20min)

› Electrochemical control of lubrication by ionic liquids - Bennewitz Roland(1), Hausen Florian(1), Sweeney James(2), Hayes Robert(2), Webber Grant(2), Endres Frank(3), Rutland Mark(4), Atkin Rob(2) 1 - INM - Leibniz Institute for New Materials (Germany), 2 - University of Newcastle, Australia (Australia), 3 - TU Clausthal-Zellerfeld (Germany), 4 - Royal Institute of Technology (Sweden) 15:30-15:50 (20min)

›15:50 (20min)

Refreshment

15:50 - 16:10 (20min)

Refreshment

›16:10 (1h50)

T5/6 - Complex tribochemical environments
Chairman: N. Spencer and M. Goto

› CARACAS - BRASILIA

16:10 - 18:00 (1h50)

T5/6 - Complex tribochemical environments

CARACAS - BRASILIA

Chairman: N. Spencer and M. Goto

› Ionic Liquids-Graphene composite carbon-based lubricating films - Xue Qunji(1), Wang Liping(1) 1 - State Key Laboratory of Solid Lubrication (China) 16:10-16:40 (30min)

› Surface-analytical investigation of boundary films formed in silica contacts lubricated by trifluoro tris(pentafluoroethyl) phosphate-based ionic liquids - Arcifa Andrea(1), Rossi Antonella(1)(2), Espinosa-Marzal Rosa(1), Spencer Nicholas(1) 1 - Laboratory for Surface Science and Technology, Department of Materials, ETH (Switzerland), 2 - Università degli Studi di Cagliari (Italy) 16:40-17:00 (20min)

› First-Principles Calculation on CMP Process of Glass Surface by CeO2 Particle and Design of Alternative Abrasive Grain - Ozawa Nobuki(1), Nakamura Miho(1), Kawaguchi Kentaro(1), Higuchi Yuji(1), Kubo Momoji(1) 1 - Fracture and Reliability Research Institute, Graduate School of Engineering, Tohoku University (Japan) 17:00-17:20 (20min)

› Fretting corrosion comparison between 316L SS and CoCrMo alloys.Effect of Ti content on cast alloys CoCrMo - Geringer Jean(1,) Nakahara Shintaro(2) Yarushima Takayuki(2) 1 - École Nationale Supérieure des Mines de Saint-Étienne (France) 2 - Department of Material Processing, Tohoku University (Japan) 17:20-17:40 (20min)

› Reliability enhancements in hard disk drives using in-situ vapor phase additives - Raman Vedantham(1) Nguyen Thomas(1), Escobar Jorge(1) 1 - Hitachi Global Storage Technologies (United States) 17:40-18:00 (20min)

›16:10 (1h50)

T3 - Thermal effects on highly loaded contacts
Chairman: J.-L. Bozet

› LIMA

16:10 - 18:00 (1h50)

T3 - Thermal effects on highly loaded contacts

LIMA

Chairman: J.-L. Bozet

› Contact temperatures during sliding contact and their influence on wear - Kennedy Francis E.(1) 1 - Thayer School of Engineering (United States) 16:10-16:40 (30min)

› Bichromatic measurement of thermal fields induced by friction - Berté Emmanuel(1), Desplanques Yannick(1), Boidin Xavier(1), Witz Jean-François(1), Dufrénoy Philippe(1) 1 - Laboratoire de Mécanique de Lille (France) 16:40-17:00 (20min)

› Effect of Temperature on Micro-Pitting Strength of Carburized Steel - Hirano Masahiro(1), Ohno Kousaku(1), Iwamoto Yasuhiro(2) 1 - Hitachi, Ltd. Hitachi Research Laboratory (Japan), 2 - Hitachi Nico Transmission Co., Ltd. (Japan) 17:00-17:20 (20min)

› Identification of thermal/friction laws governing the tool-workmaterial interface behaviour and their integration in a FE code for machining processes analyses - Haddag Badis(1) Samir Atlati(1) Mohammed Nouari (1) 1 - Laboratoire d'Énergétique et de Mécanique Théorique et Appliquée (France) 17:20-17:40 (20min)

› Erosive wear behavior of steel and iron material under the stress state - Sun Bingcai(1), Fan Jianchun(1), Wen Dong(1), Zhang Laibin(1), Chen Yingying(1) 1 - China University of Petroleum-Beijing (China) 17:40-18:00 (20min)

›16:20 (1h40)

T2 - Surface roughness: Modelling
Chairman: K. Venner

› MEXICO

16:20 - 18:00 (1h40)

T2 - Surface roughness: Modelling

MEXICO

Chairman: K. Venner

› Determination of the Friction Coefficient of Mixed Lubricated Contacts by Means of the Finite Element Analsyis - Lorentz Benoit(1), Reichert Stephan(1), Albers Albert(1) 1 - Karlsruhe Institute of Technology (Germany) 16:20-16:40 (20min)

› Multiresolution analysis of tribological surfaces - Bianchi D.(1), Betz G.(2), Vernes Andras(1)(2) 1 - Austrian Center of Competence for Tribology (Austria), 2 - Institute of Applied Physics, Vienna University of Technology (Austria) 16:40-17:00 (20min)

› New averaged Reynolds equation based on wall slip boundary conditions - Fatu Aurelian(1), Hajjam Mohamed(1) 1 - Institut Pprime (France) 17:00-17:20 (20min)

› On the modeling of two bonded silicon surfaces - Cocheteau Natacha(1), Lebon Frederic(1), Maurel Pantel Aurélien(1), Rosu Iulian(1), Ait Zaid Sonia(2), Savin Delarclause Isabelle(2) 1 - Laboratoire de Mécanique et d'Acoustique (France), 2 - Centre National d'Etudes Spatiales (France) 17:20-17:40 (20min)

› A model of watertight based on fluid movement percolation on 3D rough surfaces - Deltombe Raphaël(1), Bigerelle Maxence(1)(2), Jourani Abdeljalil(3) 1 - Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielle et Humaine (France), 2 - Laboratoire de Thermique, des Ecoulements, de Mécanique et Matériaux en Mise en Forme et Production (France), 3 - Université de Technologie de Compiègne (France) 17:40-18:00 (20min)

›19:00 (3h30)

Banquet (bus transportation is organized)

19:00 - 22:30 (3h30)

Banquet (bus transportation is organized)